Evertz Microsystems Ltd.

下载 PDF

7707ADVT

Analog or SDI Video with 4 Channel Analog or AES Audio Fiber Transmitter

VistaLINK® 兼容 Dolby 合作伙伴
特点
  • Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals
  • Auto-sensing (analog or digital) video and audio inputs
  • Supports both NTSC and PAL analog or 4:2:2 component digital video
  • Supports Analog to Digital and Digital to Analog audio conversion
  • Broadcast quality analog video and audio performance
  • Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
  • Supports 32, 44.1, 48kHz AES audio inputs
  • Dolby E compatible
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®.
  • Audio de-embedding capability for digital video and Analog or AES Audio
    • -NF version converts input video & audio to a 270Mb/s copper output to interface with any SD-SDI or other 270Mb/s service
    • 当此模块与 7700FC VistaLINK® 主机控制器一起装在同一台 7800FR 主机上时,允许VistaLINK® 通过SNMP (使用VistaLINK® PRO) 进行远程监测与控制
    • Adjustable gain equalization for analog video for up to 250m of Belden 1694A coaxial cable
    • Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
    • Supports single-mode and multi-mode fiber optic cable
    • Optical output wavelengths at 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU G 694.2 compliant)
    • DWDM wavelengths also available (ITU G.694.1 compliant)
    • Outputs available with fiber optics and BNC or BNC's only (-NF version)
    • Passes embedded and/or external audio for digital video
产品结构图 产品结构图

指标

Analog Video Input
标准NTSC (SMPTE ST 170), PAL (ITU-R 624-2)
输入数量1
端口数目BNC per IEC 61169-8 Annex A
Signal Quantization12 bits
System Bandwidth> 5.5MHz
Level2V p-p (maximum)
Gain EqualizationUp to 250m of Belden 1694 or equivalent (adjustable)
阻抗75Ω
反射损失> 30dB to 5.5MHz
信噪比> 70dB
微分增益< 1.0%
微分相位< 0.7°
Passband Ripple
NTSC< ±0.1dB to 4.1MHz
< ±0.2dB to 5.5MHz
PAL< ±0.1dB to 4.8MHz
< ±0.2dB to 5.8MHz
Chroma/Luma Gain98% to 103%
Chroma/Luma Delay
NTSC< 5ns
PAL< 12ns
Line Time Distortion1.2%
串行视频输入
标准SMPTE ST 259-C, SMPTE ST 305 (SDTi), DVB-ASI
输入数量1
端口数目BNC per IEC 61169-8 Annex A
均衡Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable
反射损失> 15dB up to 270Mb/s
Analog Video Output
标准Same as Analog Video Input
输出数量1
端口数目BNC per IEC 61169-8 Annex A
Level1V p-p
阻抗75Ω
反射损失> 30dB to 5.5MHz
串行视频输出
输出数量2 (1 loopback, 1 serial)
端口数目BNC per IEC 61169-8 Annex A
信号电平800mV nominal
直流偏置0V ±0.5V
上升/下降时间900ps nominal
过冲< 10% of amplitude
反射损失> 15dB at 270Mb/s
频带抖动< 0.2UI
Analog Audio Input
输入数量4
Type平衡 analog audio
端口数目12-pin removable terminal block
阻抗High Impedance (> 10kΩ)
频率响应±0.1dB, 20Hz to 20kHz
THD< 0.005%, 20Hz to 20kHz
Channel Phase Differential±1°
SNR (weighted)> 85dB
Maximum Input Level+24dBu
Signal Quantization24 bits
AES Audio Input
输入数量4 (auto-sensing for balanced or unbalanced input)
标准
平衡AES3-1992
非平衡SMPTE ST 276
OtherDolby E compatible
输入数量4 (auto-sensing for balanced or unbalanced input)
端口数目12 pin removable terminal block
反射损失> 15dB, 1MHz to 6MHz
信号电平
平衡1V to 7V p-p
非平衡1.2V p-p ±0.1V
均衡
平衡450m of Belden 1800D cable
非平衡1500m of Belden 1694A cable
ResolutionUp to 24 bits
Sampling Rate32, 44.1, 48kHz
阻抗
平衡110Ω
非平衡75Ω
光输出
输出数量1
端口数目Female SC/PC, ST/PC, FC/PC
反射损失> 14dB
上升/下降时间200ps nominal
光纤大小9µm core / 125µm overall
工作波长
标准1310nm, 1550nm (nominal)
CWDMSee Ordering Information
DWDMSee Ordering Information
功率
1310nm FP (Standard)-7dBm ±1dBm
1550nm & CWDM DFB0dBm ±1dBm
DWDM DFB7dBm ±1dBm
电气
电压+12V DC
功率15 瓦 (Non-DWDM) or 18 瓦 (DWDM)
物理参数
插槽数1
标准
Laser SafetyClass 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
EMI/RFIComplies with FCC Part 15, Class A, EU EMC Directive

订购信息

Analog or SDI Video with 4 Channel Analog or AES Audio Fiber Transmitter
7707ADVT131310nm FP laser (-7dBm launch power)
7707ADVT151550nm DFB laser
7707ADVT-NFElectrical outputs only
CWDM (订购信息)
7707ADVTxxCWDM laser
7707ADVTDxxxDWDM DFB laser
订购可选项
注意后面板和光纤接头必须在下订单时指明 - eg: [model]+SC+3RU
接头后缀
+SCSC/PC
+STST/PC
+FCFC/PC
后面板后缀
+3RU3RU 后面板用于7800FR, 7801FR, 7700FR-C 或 350FR 多用途主机
+1RU1RU 后面板用于7701FR 多用途主机
+SA独立封装后面板
机箱
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU 多用途主机,可装15 个模块
7800FR3RU 多用途主机,可装15 个模块
7701FR1RU 多用途主机,可装 3 个模块
S7701FR独立封装
光纤连接电缆
CB-FP1M-SCPC单模光纤, 1m, SC/PC 公头终接
CB-FP1M-STPC单模光纤, 1m, ST/PC 公头终接
CB-FP5M-SCPC单模光纤, 5m, SC/PC 公头终接
CB-FP5M-STPC单模光纤, 5m, ST/PC 公头终接
CB-FP10M-SCPC单模光纤, 10m, SC/PC 公头终接
CB-FP10M-STPC单模光纤, 10m, ST/PC 公头终接
About Us | Contact | Support © 2012 Evertz Microsystems, Ltd. All rights reserved webmaster@evertz.com