Evertz Microsystems Ltd.

下载 PDF

7707EO-3G

3G / HD / SD Electrical to Optical Converter

VistaLINK® 兼容 3Gb/s enabled
特点
  • Supports all SMPTE ST 424 standards at 2.970Gb/s
  • Supports all SMPTE ST 292-1 standards at 1.485Gb/s
  • Supports SMPTE ST 259-C standards at 270Mb/s
  • Supports DVB-ASI (270Mb/s) and SMPTE ST 305 (SDTi) rates
  • Auto rate selection, indication and reclocking for SD-SDI/HD/3G data rates from 270Mb/s to 2.970Gb/s
  • Selectable non-reclock mode for other data rates
  • Programmable general purpose output (GPO)
  • Automatic input equalization up to 100m to 1.5Gb/s, 250m to 270Mb/s and 70m to 3Gb/s
  • Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
  • DWDM wavelengths (ITU-T G.694.1 compliant) also available
  • Supports single-mode and multi-mode fiber optic cable
  • Fully hot-swappable from front of frame
    • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
    • 当此模块与 7700FC VistaLINK® 主机控制器一起装在同一台 7800FR 主机上时,允许VistaLINK® 通过SNMP (使用VistaLINK® PRO) 进行远程监测与控制
    • Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

指标

串行视频输入
标准
ReclockedSMPTE ST 424, SMPTE ST 292-1, SMPTE ST 259-C, SMPTE ST 305, DVB-ASI
Non-ReclockedAny bi-level signal type at rates of 270Mb/s to 2.970Gb/s
端口数目1 BNC per IEC 61169-8 Annex A
均衡Automatic to 100m @ 1.485Gb/s, 70m @ 3Gb/s with Belden 1694A or equivalent cable and 250m @ 270Mb/s with Belden 8281 or equivalent cable
反射损失> 15dB to 1.5GHz
> 10dB to 3GHz
Serial Video Outputs
输出数量2
端口数目BNC per IEC 61169-8 Annex A
信号电平800mV ±80mV
直流偏置0V ±0.5V
上升/下降时间< 135ps (HD/3G)
< 900ps (SD)
过冲< 10% of amplitude
反射损失> 15dB to 1.5GHz
> 10dB to 3GHz
Alignment Jitter< 0.2 UI (Reclocked) to 1.485Gb/s
< 0.3 UI (Reclocked) to 2.97Gb/s
光输出
标准SMPTE ST 297
输出数量1
端口数目Female SC/PC, ST/PC or FC/PC
反射损失> 14dB
上升/下降时间< 135ps (HD/3G)
< 900ps (SD)
Alignment Jitter< 0.2 UI (Reclocked) to 1.485Gb/s
< 0.3 UI (Reclocked) to 2.97Gb/s
工作波长See Ordering Information
Output Power
1310nm FP-7dBm ±1dBm
1310/1550nm DFB0dBm ±1dBm
CWDM0dBm ±1dBm
DWDM7dBm ±1dBm
General Purpose Outputs
TypeDry contact relay closure (normally open)
输出数量1
端口数目Multi-pin removable terminal block
Max Current500mA @ 12V
电气
电压+12V DC
功率8 瓦 (Non DWDM), 11 瓦 (DWDM)
物理参数
插槽数1
标准
Electrical SafetyCSA Listed to UL 60065-03, IEC 60065
Complies with CE Low voltage Directive
Laser SafetyClass 1 laser product
Complies with 24 CFR 1040.10 and 1040.11
IEC 60825-1
EMI/RFIComplies with FCC Part 15, Class A
EU EMC directive

订购信息

3G/HD/SD Electrical to Optical Converter
7707EO13-3G1310nm FP laser
7707EO15-3G1550nm DFB laser
CWDM & DWDM (订购信息)
7707EOxx-3GCWDM DFB laser
7707EODxxx-3GDWDM DFB laser
订购可选项
注意后面板和光纤接头必须在下订单时指明 - eg: [model]+SC+3RU
接头后缀
+SCSC/PC
+STST/PC
+FCFC/PC
后面板后缀
+3RU3RU 后面板用于7800FR, 7801FR, 7700FR-C 或 350FR 多用途主机
+1RU1RU 后面板用于7701FR 多用途主机
+SA独立封装后面板
机箱
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU 多用途主机,可装15 个模块
7800FR3RU 多用途主机,可装15 个模块
7701FR1RU 多用途主机,可装 3 个模块
S7701FR独立封装
光纤连接电缆
CB-FP1M-SCPC单模光纤, 1m, SC/PC 公头终接
CB-FP1M-STPC单模光纤, 1m, ST/PC 公头终接
CB-FP5M-SCPC单模光纤, 5m, SC/PC 公头终接
CB-FP5M-STPC单模光纤, 5m, ST/PC 公头终接
CB-FP10M-SCPC单模光纤, 10m, SC/PC 公头终接
CB-FP10M-STPC单模光纤, 10m, ST/PC 公头终接
About Us | Contact | Support © 2012 Evertz Microsystems, Ltd. All rights reserved webmaster@evertz.com