Tools
光纤类
- Advanced Optical Transport
- Bulk Optical
- 3Gb/s Video
- SD-SDI Video
- Analog Video & Audio
- RGB & DVI
- Datacom & Telecom
- RF Transport
- SONET / SDH Transport
- Fiber Routers
7707ET-TE1
以太网及T1/E1/J1 光收发器
The 7707ET-TE1 is a VistaLINK® -capable Ethernet and T1/E1/J1 Fiber Transceiver that provides an economical method of transmitting one 10/100BaseT Ethernet signal and one T1/E1/J1 signal over optical fiber. Monitoring control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®. A pair of 7707ET-TE1 transceivers permits full duplex communication of all signals over single or dual optical fibers.
The 7707ET-TE1 provides one RJ45 input connector for the 10/100BaseT Ethernet, one RJ45 input connector for the T1/E1/J1 and one or two fiber optic output connectors. Multiple versions of the 7707ET-TE1 are available to address single-mode/multi-mode fiber, single/dual fiber and CWDM/DWDM applications (See Applications Configuration Chart below).
The 7707ET-TE1 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
特点
|
|
指标
| Ethernet Input/Output | |
|---|---|
| 标准 | IEEE 802.3 (10 BaseT), IEEE 802.3u (100 BaseTX) |
| 端口数目 | 1 RJ45 |
| Cable Requirements | |
| 10 BaseT | UTP category 3,4 or 5 cable up to 328ft/100m (2 pairs) |
| 100 BaseTX | UTP category 5 cable up to 328ft/100m(2 pairs) |
| T1/E1/J1 Input/Output | |
|---|---|
| 标准 | G.703 |
| 端口数目 | 1 RJ45 |
| Cable Requirements | 0.63mm (22 AWG) cable up to 1000m |
| Optical Input/Output | |
|---|---|
| 端口数目 | |
| Single Fiber versions | 1 Female SC/PC, ST/PC or FC/PC |
| Dual Fiber (F2) versions | 2 Female SC/PC, ST/PC or FC/PC |
| Max. Input Power | 0dBm |
| Input Wavelength | 1270nm-1610nm |
| 光敏感度 | |
| WDM (-w version) | -27dBm |
| 标准 | -29dBm |
| 工作波长 | |
| 标准 | 1310nm, 1550nm |
| CWDM | 1270nm -1610nm |
| DWDM | C-Band (ITU-T G.694.1 compliant) |
| Output Power | |
| 1310nm FP | -7dBm ±1dBm |
| 1310nm (-W) | -9dBm ±1dBm |
| 1550nm (-W) | -1dBm ±1dBm |
| 1550nm, CDWM (DFB) | 0dBm ±1dBm |
| DWDM (DFB) | +7dBm ±1dBm |
| 电气 | |
|---|---|
| 电压 | 12V |
| 功率 | 6 瓦 (Non DWDM) 8W (DWDM) |
| 物理参数 | |
|---|---|
| Number of slots | 1 |
| 标准 | |
|---|---|
| Laser Safety | Class 1 laser product Complies with 24 CFR 1040.10 and 1040.11 IEC 60825-1 |
| EMI/RFI | Complies with FCC Part 15, Class A EU EMC Directive |
订购信息
| 以太网及T1/E1/J1 光收发器 | |
|---|---|
| 7707ET13M-TE1-W | 单光纤, WDM, 1310nm FP 发射, 1550nm 接收 |
| 7707ET15-TE1-W | 单光纤, WDM, 1550nm DFB 发射, 1310nm 接收 |
| 7707ET13-TE1-F2 | 双光纤, 1310nm FP 收发 |
| CWDM & DWDM (订购信息) | |
|---|---|
| 7707ETxx-TE1-F2 | 双光纤, CWDM DFB 激光 |
| 7707ETDxxx-TE1-F2 | 双光纤, DWDM DFB 激光 |
| 订购可选项 | |
|---|---|
| 注意 | • 后面板和光纤接头必须在下订单时指明 - eg: [model]+SC+3RU |
| 接头后缀 | |
|---|---|
| +SC | SC/PC |
| +ST | ST/PC |
| +FC | FC/PC |
| 后面板后缀 | |
|---|---|
| +3RU | 3RU 后面板用于7800FR, 7801FR, 7700FR-C 或 350FR 多用途主机 |
| +1RU | 1RU 后面板用于7701FR 多用途主机 |
| +SA | 独立封装后面板 |
| 机箱 | |
|---|---|
| 350FR | Portable Multiframe which holds 7 modules |
| 7700FR-C | 3RU 多用途主机，可装15 个模块 |
| 7800FR | 3RU 多用途主机，可装15 个模块 |
| 7701FR | 1RU 多用途主机，可装 3 个模块 |
| S7701FR | 独立封装 |
| 光纤连接电缆 | |
|---|---|
| CB-FP1M-SCPC | 单模光纤, 1m, SC/PC 公头终接 |
| CB-FP1M-STPC | 单模光纤, 1m, ST/PC 公头终接 |
| CB-FP5M-SCPC | 单模光纤, 5m, SC/PC 公头终接 |
| CB-FP5M-STPC | 单模光纤, 5m, ST/PC 公头终接 |
| CB-FP10M-SCPC | 单模光纤, 10m, SC/PC 公头终接 |
| CB-FP10M-STPC | 单模光纤, 10m, ST/PC 公头终接 |