Evertz Microsystems Ltd.

下载 PDF

7707VT-4-HS

Dual HD/Quad SD Fiber Transmitter

VistaLINK® 兼容
特点
  • Single card TDM multiplexer for two HD-SDI signals, or one HD-SDI signal and three SDI/DVB-ASI/SDTi signals, or four SDI/DVB-ASI/SDTi signals
  • Two auto-sensing video inputs for HD-SDI or SDI/DVB-ASI/SDTi video signals
  • Two 270MB/s inputs for SDI video signals
  • Signal transport over fiber uninterrupted by loss of any HD-SSDI, SDI, SDTi or DVB-ASI input feed
  • Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
  • Automatic coaxial input equalization up to 100m at 1.485Gb/s and 250m at 270Mb/s (Belden 1694)
  • Fully hot-swappable from front of frame
  • Supports single-mode and multi-mode fiber optic cable
  • Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
  • DWDM wavelengths (ITU-T G.694.1 compliant) also available
    • SC/PC, ST/PC, FC/PC connector options
    • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
    • 当此模块与 7700FC VistaLINK® 主机控制器一起装在同一台 7800FR 主机上时,允许VistaLINK® 通过SNMP (使用VistaLINK® PRO) 进行远程监测与控制
    • Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
产品结构图 产品结构图

指标

串行视频输入
输入数量4
标准
Inputs 1&2SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305
Inputs 3&4SMPTE ST 259-C, DVB-ASI, SMPTE ST 305
接头BNC per IEC 61169-8 Annex A
均衡Automatic to 100m @ 1.485Gb/s and 250m @ 270Mb/s with Belden 8281 or equivalent cable
反射损失> 15dB 高至 1.5Gb/s
串行视频输出
输出数量1, loopback signal user selectable from above 4 inputs
接头BNC per IEC 61169-8 Annex A
标准SMPTE ST 292-1, SMPTE ST 259-C, SMPTE ST 305.2
信号电平800mV nominal
直流偏置0V ±0.5V
上升/下降时间< 270ps at 1.485Gb/s and 900ps nominal at 270Mb/s
过冲< 10% of amplitude
反射损失> 12dB to 1.5Gb/s
频带抖动< 0.2UI
光输出
输出数量1
接头母头 SC/PC, ST/PC 或 FC/PC
反射损失> 14dB
频宽抖动< 0.2UI
光纤大小中心 9µm/外围 125µm
波长
标准1310nm, 1550nm (nom称)
CWDM1270nm - 1610nm (参考订购信息)
DWDM1530nm - 1560nm (ITU-T G.694.1 兼容)(参考订购信息)
功率
1310nm FP (标准)-6dBm ±1dBm
1550nm & CWDM DFB0dBm ±1dBm
DWDM DFB+7dBm ±1dBm
电气
电压+12V DC
功率10 瓦 (非-DWDM) 或 13 瓦 (DWDM)
物理参数
插槽数1
标准
Laser SafetyComplies with 24 CFR 1040.10 and 1040.11
EMI/RFIComplies with FCC regulations for class A devices
Complies with EU EMC directive

订购信息

Dual HD/Quad SD Fiber Transmitter
7707VT13-4-HS1310nm FP laser
7707VT15-4-HS1550nm DFB laser
CWDM & DWDM (订购信息)
7707VTxx-4-HSCWDM DFB laser
7707VTDxxx-4-HSDWDM DFB laser
订购可选项
注意后面板和光纤接头必须在下订单时指明 - eg: [model]+SC+3RU
接头后缀
+SCSC/PC
+STST/PC
+FCFC/PC
后面板后缀
+3RU3RU 后面板用于7800FR, 7801FR, 7700FR-C 或 350FR 多用途主机
+1RU1RU 后面板用于7701FR 多用途主机
+SA独立封装后面板
机箱
350FRPortable Multiframe which holds 7 modules
7700FR-C3RU 多用途主机,可装15 个模块
7800FR3RU 多用途主机,可装15 个模块
7701FR1RU 多用途主机,可装 3 个模块
S7701FR独立封装
光纤连接电缆
CB-FP1M-SCPC单模光纤, 1m, SC/PC 公头终接
CB-FP1M-STPC单模光纤, 1m, ST/PC 公头终接
CB-FP5M-SCPC单模光纤, 5m, SC/PC 公头终接
CB-FP5M-STPC单模光纤, 5m, ST/PC 公头终接
CB-FP10M-SCPC单模光纤, 10m, SC/PC 公头终接
CB-FP10M-STPC单模光纤, 10m, ST/PC 公头终接
About Us | Contact | Support © 2012 Evertz Microsystems, Ltd. All rights reserved webmaster@evertz.com