7732DVP-3D-HD
3D HD Video Processor
The 7732DVP-3D-HD Video Processor module is a multi-purpose module designed specifically to aid in the production and post production of 3D high definition video productions.
This 7700 series module provides for Left eye and Right eye inputs and processed outputs. In addition it also provides a mix output that is a combination of the left eye and right eye.
The 7732DVP-3D-HD occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
特点
|
|
产品结构图 
指标
| Serial Video Inputs | |
|---|---|
| 标准 | 1.485Gb/sec SMPTE ST 292-1 - auto-detects standard SMPTE ST 274, SMPTE ST 296 -1080i/60, 1080i/59.94, 1080i/50, 1080p/24sF, 1080p/23.98sF, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 720p/60, 720p/59.94, 720p/50 |
| 输入数量 | 2 |
| 端口数目 | BNC per IEC 61169-8 Annex A. |
| Input Equalization | Automatic to 65m @ 1.5Gb/s with Belden 1694 or equivalent cable |
| 反射损失 | > 12dB up to 1.5GHz |
| Serial Video Outputs | |
|---|---|
| 标准 | Same as input |
| 输出数量 | 2 Program 1 Mix |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| 信号电平 | 800mV nominal |
| 直流偏置 | 0V ±0.5V |
| 上升/下降时间 | 200ps nominal |
| 过冲 | < 10% of amplitude |
| 反射损失 | > 15dB at 1.5Gb/s |
| 抖动 | < 0.16UI (HD) |
| GPIO Control Port | |
|---|---|
| 输入数量 | 8 |
| Type | Opto-isolated, active low with internal pull-ups to +5 or +12V (jumper settable) |
| 端口数目 | 9 pin female D |
| 信号电平 | closure to ground |
| Input to Output Processing Delay | |
|---|---|
| HD Input Video | 2 lines |
| 电气 | |
|---|---|
| 电压 | +12V DC |
| 功率 | 10 瓦 |
| EMI/RFI | Complies with FCC regulations for class A devices Complies with EU EMC directive |
| 物理参数 | |
|---|---|
| Number of slots | 1 |
订购信息
| 7732DVP-3D-HD | 3D HD Video Processor |
|---|
| 订购可选项 | |
|---|---|
| 注意 | • 后面板必须在下订单是指明 - eg: [model]+3RU |
| 后面板后缀 | |
|---|---|
| +3RU | 3RU 后面板用于7800FR, 7801FR, 7700FR-C 或 350FR 多用途主机 |
| +1RU | 1RU 后面板用于7701FR 多用途主机 |
| +SA | 独立封装后面板 |
| 机箱 | |
|---|---|
| 350FR | Portable Multiframe which holds 7 modules |
| 7700FR-C | 3RU 多用途主机，可装15 个模块 |
| 7800FR | 3RU 多用途主机，可装15 个模块 |
| 7701FR | 1RU 多用途主机，可装 3 个模块 |
| S7701FR | 独立封装 |