7746FS-EAES8-DD-AC3E-HD
HD/SD-SDI 8 AES Frame Synchronizer with Dolby Decoder and Dolby Digital (AC-3) Encoder
The 7746FS-EAES8-DD-AC3E-HD HD/SD-SDI Frame Synchronizer is designed to re-time the input to a local reference tri-level or composite sync signal. When necessary, frames are repeated or dropped to maintain synchronization.
This device provides:
- HD/SD frame synchronization
- HD/SD video proc functions
- Dolby E decode from embedder or discrete source
- 16 channel audio proc
- Audio synchronization
- Dolby AC-3™ encode
- 16 channel audio demux & re-mux
- IntelliGain™ Loudness Processor (optional)
The module will also pass all VANC data after switching line. When the input video is lost, it will pass the input AES or mute if embedded audio is selected for synchronizing. The frame synchronizers also have the ability to set the audio delay independently from the video delay.
Video proc features are provided allowing the ability to adjust video parameters such as brightness, contrast and saturation. Hue control is available for SD standards (525i/59.94 and 625i/50).
The on-board Dolby Decoder processes one user selectable audio channel. If the channel contains Dolby-E or Dolby Digital (AC-3), it will yield up to 8 additional discrete audio channels, 2 channels of stereo downmix and the associated Dolby metadata. This metadata can be optionally embedded into the VANC, used to program the Dolby Digital (AC-3) encoder, or can be provided as an output for downstream devices.
The on-board audio processor provides control to route, shuffle, mix and proc up to 16 selected channels. All channels can be additionally delay.
Six audio channels can be selected and encoded to Dolby Digital (AC-3). The encoder supports bit ranges from 56 to 640kb/s and channel configurations from mono to 5.1-channel surround sound. Dolby Metadata can be accepted from the input Dolby E stream, extracted from the VANC, from an external source or authored (via VistaLINK® PRO).
The final processed audio can be re-embedded as 4 embedded audio groups into the HD/SD-SDI output signal and additionally can be routed discretely to the AES outputs.
VistaLINK® enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP - enabled control systems such as Evertz VistaLINK® PRO locally or remotely.
特点
|
|
指标
| 串行视频输入 | |
|---|---|
| 标准 | 1.485Gb/s SMPTE ST 292-1 SMPTE ST 274, SMPTE ST 296, SMPTE ST 349, 270Mb/s SMPTE ST 259-C 525i/59.94or 625i/50 |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| Input Equalization | |
| SD | Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable |
| HD | Automatic to 115m @ 1.5Gb/s with Belden 1694A or equivalent cable |
| 反射损失 | |
| SD | > 15dB up to 270MHz |
| HD | > 13dB up to 1.5GHz |
| Serial Video Outputs | |
|---|---|
| 输出数量 | 2 (1 output is bypass relay protected) |
| Connectors | BNC per IEC 61169-8 Annex A |
| 信号电平 | 800mV nominal |
| 直流偏置 | 0V ±0.5V |
| 上升/下降时间 | 200ps nominal (HD) 900ps nominal (SD) |
| 过冲 | < 10% of amplitude |
| Wide Band Jitter | < 0.16 UI (HD) or < 0.10 UI (SD) |
| 同步锁相 Input | |
|---|---|
| Type | HD 三电平 Sync NTSC or PAL Color Black 1V p-p, or Composite bi-level sync (525i/59.94 or 625i/50) 300mV |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| Termination | 75Ω (jumper selectable) |
| AES Audio Input | |
|---|---|
| 标准 | SMPTE ST 276 |
| 输入数量 | 8 unbalanced |
| 端口数目 | Female High Density DB-15 (breakout cable to BNC provided) |
| Input Level | 0.1 to 2.5V p-p (5V p-p tolerant) |
| Input Impedance | 75Ω |
| 反射损失 | > 25dB 100kHz to 6MHz |
| 均衡 | Automatic to 1000m with Belden 1694A (or equivalent) @ 48kHz AES signal |
| Sample Rate | 48kHz ±100ppm |
| AES Audio Output | |
|---|---|
| 标准 | SMPTE ST 276, single ended AES |
| 输出数量 | 8 unbalanced |
| 端口数目 | Female High Density DB-15 (breakout cable to BNC provided) |
| Sample Rate | 48kHz |
| 阻抗 | 75Ω |
| Resolution | 24-bit |
| Meta-Data | |
|---|---|
| Type | Dolby-E™ Metadata SMPTE RDD6 |
| 标准 | RS-422 |
| 端口数目 | Female DB-9 |
| 波特率 | 115,200 baud |
| VANC Embedding | SMPTE ST 2020 |
| Processing Functions | |
|---|---|
| Video | |
| Black Level | ±7% |
| Luminance Gain | ±6dB |
| Chrominance Gain | ±6dB |
| Hue | ±20° (SD) |
| Audio | |
| Gain | ±24dB (including invert) |
| Remapping | Any input or mix of any two inputs to any output |
| Input To Output Processing Delay | |
|---|---|
| Video Processing Delay | |
| Minimum Delay Mode | 3 lines to 1 frame plus 3 lines |
| Additional Delay Mode | Up to 12 frames for interlaced formats (28 frames for progressive formats) of additional delay (1 frame increments) |
| Data Logging Serial Port | |
|---|---|
| 标准 | RS 232 |
| 端口数目 | Software upgrade cable female DB-9 |
| 波特率 | 115,200 |
| 格式 | 8 bits, no parity, and 2 stop bits |
| 电气 | |
|---|---|
| 电压 | +12V DC |
| 功率 | 24 瓦 |
| EMI/RFI | Complies with FCC Part 15, Class A EU EMC Directive |
| 物理参数 | |
|---|---|
| 7700 frame mounting | 2 slots |
订购信息
| 注意 | • Requires 7700FC for full module control |
|---|
| 7746FS-EAES8-DD-AC3E-HD | HD/SD-SDI 8 AES Frame Synchronizer with Dolby Decoder and Dolby Digital (AC-3) Encoder |
|---|
| 订购可选项 | |
|---|---|
| 注意 | • 后面板必须在下订单是指明 - eg: [model]+3RU |
| +IG | Integrated IntelliGain® Audio and Loudness Processor |
|---|
| 后面板后缀 | |
|---|---|
| +3RU | 3RU 后面板用于7800FR, 7801FR, 7700FR-C 或 350FR 多用途主机 |
| 机箱 | |
|---|---|
| 350FR | Portable Multiframe which holds 7 modules |
| 7700FR-C | 3RU 多用途主机,可装15 个模块 |
| 7800FR | 3RU 多用途主机,可装15 个模块 |
| 附件 | |
|---|---|
| WPAES8-BNCM-6F | WPAES8-BNCM-6F cable (included) |
| 7700FC | VistaLINK® Frame Controller |
| CP-2116E | System Control Panel, One Touchscreen LCD and 16 LCD Buttons |
| CP-2232E | System Control Panel, 2RU, Two Touchscreen LCDs and 32 LCD Buttons |




