************************************************ * This firmware is for the following products: * * -------------------------------------------- * * 7710XUDC-AES4-HD * ************************************************ version 2.00 build 48 (13 Feburary, 2008) -------------------------------------------------- - Range of the YCbCr and RGB gain controls in the proc amp were increased to +/-200% - Added the ability to decode AFD and Pan and Scan packets from SD input video - Added a control to invert the input audio phase of each audio channel - Added support for MIB push version 1.07 build 2 (30 Nov, 2007) -------------------------------------------------- -added support for different flash memory Version 1.06 build 409 (June 25, 2007) -------------------------------------------------- -Added support for automatically switching video input sources between the PGM IN and PGM IN/OUT BNCs. -Implemented blanking of output video when input video standard changes (auto input video standard) or when missing video becomes present (non-auto input video standard). -Added support for no glitch mode. This is used to enable glitch free switching on a video standard change, or a change in the video presence. -Added support for FTP upgrades. -Frame rate menu item commits value on button push only. -Default PGM OUT/IN mode is video out. -Added support for fault traps. Version 1.05 build 290 (March 10, 2006) -------------------------------------------------- - added support for RGB clip and gamma adjustment parameters - corrections to menu strings - correction to SD CC - added support for factory presets - added noise reducer support - added EIA 608/708 present to the status window - corrected 23.98P/sF oututs with aspect ratio set to full Version 1.03 build 66 (June 30, 2005) -------------------------------------------------- - cleaned up character inserter code. Small functions that were only called from 1 place were merged with their caller. - removed redundant function that was used to load the font, and initialize the character inserter hardware. - simplified character inserter function interfaces. - use pointer math when writing to the character inserter hardware buffer. - use single buffered character inserter tables to maintain what is drawn to the hardware. double buffering is only needed if the hardware does not have its own buffer. - moved character inserter row and column definitions to the character inserter table class definition. - removed interrupt protection from USB lock function. This is redundant with the interrupt protection in the interrupt ack and enable FPGA register write functions. - removed unused global variables. - field counter in video output vertical interrupt should not change when video standard is progressive. There is only 1 "field" in progressive standards. - character inserter hardware buffer is updated as soon as the frame flag is set. This is to ensure that writes to this buffer complete before the hardware needs to use the data. This was done to prevent "flashing" of the status window. - fixed line advance FS problem. - audio delay is displayed in ms. - corrected issue that if DIP switches are active and a preset is recalled, it will get erased, and an error message stating that the preset was corrupt is displayed. - new deinterlacer defaults. - added support for RGB clip and gamma adjust parameters. -fixed some phasing problems. Version 1.02 build 634 (May 27, 2005) -------------------------------------------------- - multiple changes to improve preformance Version 1.1 build 10 (December 16, 2004) ------------------------------------------------------- - first release - this version of firmware does not support the following functions: - Audio - Closed Captions - VITC time code