V1.5 Build 15


Note that this upgrade requires the 775x-TG2 card to be upgraded.


****************************************************************************
Be sure to use the correct version of 775x-TG2 software.  If you do not know
which version to use, upgrade the 5600MSC, and then go to:

  
   GENERAL > FIRMWARE > Uprade 775x-TG2
   7751tg2hd_3v1b5.bin
   or 
   7750tg2hd_1v3b1.bin

****************************************************************************
	
Changes since version 1.4 build 1.



Support was added for LTC input.

For both 7751TG2-hd, and 7750TG2-HD,  H and V phasing controls are now live.

Closed captioning signals have been added to the 7751TG2-HD.

16 channels of audio are available on the 7751TG2-HD.

The audio is synchornized on the 7751TG2-HD.

Reduced movement in the Genlock, narrow range mode.

Faster genlock from startup.

Moving line now has text in it.

ATG and SDI test signals can be toggled from GPI's.

Added 5 new standards to the sync outputs.  720P50, 720P24, 720P23.98, 625i48(slo Pal) and 625i49.97(slo Pal).

Added controls to GPI usage (under GENERAL).  Allows GPI's to be used to cycle through ATG and SDI TG test signals

Added exclusion controls.  ATG, STG and/or HTG can now be excluded from synchro mode.

Syncro mode was deactivated when input was referenced to 10MHz, or internal.  Now, it just excludes global phasing.

Forced 775xTG2 to be phase locked.

10MHz is bypassed when Genlocked, and in wide range.

Lat, Long has been added to the user bits as a mode of date.