*********************************************************
* This firmware is for the following products:          *
* --------------------------------------------          *
* HDSD9545DLY-PRO                                       *
*********************************************************

version 1.1 build 435 (22 Feb, 2008)
--------------------------------------
- added support for new flash memories


Version 1.1 build 422 (April 04, 2006)
--------------------------------------
- added support for Web server control/status
- added support to bypass reaction time on switch back
- correction to HD audio embedder 
- corrected Blur feature not being centered
- removed timed program and safe blur from button 1 factory defaults


Version 1.1 build 147 (November 25, 2005)
--------------------------------------
- added H and V blanking and H Blank transition features
- corrected HD video timecode with embedded softswitch
- corrected SAV with Quad Split Video
- Reaction time is used at end of transition along with 
  the start of transition
- Improved embedded audio on timed active video switch
- Embedded audio Soft Switched correction
- corrected Presets on Firmware upgrade

Version 1.1 build 85 (August 24, 2005)
--------------------------------------
- added GPIO configuration (active low/high selection)
- corrected GPIO polarity inversion

Version 1.1 build 79 (May 27, 2005)
-----------------------------------
**Note: This code supports both the original option and the -HD40 option**

- when switch is pending not allowed to change system config
- added Individual embedded audio channel soft mute support
- added AES output A selection
- added active video clean switch
- added timed hard mutes
- corrected menu text to agree with manual
- immediate events no longer override timed events
- timed events maintain length of event even if immediate event is over
- corrected GPIO polarity inversion


Version 1.0 build 1207 (February 25, 2005)
------------------------------------------
- added support for 1080i50 and 625i50 video standards
- on power up video output A has live feed until program delay buffer is full
- correction to audio/video lip sync issues
- minor changes to quad split output OSD

Version 1.0 build 540 (January 6, 2005)
---------------------------------------
- changed output video to black on loss of video
- added video blur to program and safe delayed video paths

Version 1.0 build 506 (December 20, 2004)
-----------------------------------------
- correction to audio delay issue

Version 1.0 build 435 (December 10, 2004)
-----------------------------------------
- correction to audio delay for non 29.97fps video standards
- correction to recall OSD menu settings properly
- correction to program label on OSD
- safe video blanked on safe-mode change
- correction for video timing errors caused by upstream router switch

Version 1.0 build 375 (November 29, 2004)
-----------------------------------------
- correction to preset recall issue
- correction to capture delay issue
- added warning to timing menu

Version 1.0 build 313 (November 24, 2004)
-----------------------------------------
- correction to AES audio monitor output (3B) issue

Version 1.0 build 310 (November 19, 2004)
-----------------------------------------
- added front panel display of FTP upload status
- improved up and down key-repeat timings
- added "Please Wait" message when rebooting to change video standard
- added new quad split borders for indicating audio and video on-air status individually
- changed embedded audio SoftSwitch enable/disable to only be done for all groups
- correction to Jamming code to always start in the middle of the jitter region when video becomes present
- corrects issue when safe input unplugged and when phase offsets between safe and program are close but not the same
  (~1 vertical line )
- correction to embedded audio Softswitch fade up from mute
- correction to AES SS menu items so that "NON PCM" fits on the screen
- reduced max video delay to prevent quad-split interference
- correction for Reaction time overlap issue
- correction for Assigning/deassigning front panel button transitions causing sticky front panel lights
- correction to discrete audio SoftSwitch
- correction for setup key functionnality
- safe input must be present at all times, causes program video and program embedded audio artifacts
- removed DARS from audio reference menu

Version 1.0 build 249 (November 09, 2004)
-----------------------------------------
- split up discrete AES audio switch so each set of inputs has it's own transition
- corrected lock to input when genlock not present or incorrect standard
- minimum delay mode increased to 2 frames to prevent quad split from being overwritten in capture mode
- corrected delayed outputs on loss of input video
- corrected quad split issue where program delayed quadrant was not functionning when safe input not present  

Version 1.0 build 111 (October 29, 2004)
----------------------------------------
- first release