******************************************************** 
*  This firmware is for the following products:        *
*------------------------------------------------------*
*  7812DCDA2Q-HD             7812DCDA2Q-HD-AA          *
*  7812DCDA2Q-HD-AES4        7812DCDA2Q-HD-AA-RPBNC    *
*  7812DCDA2Q-HD-AES4-RPBNC  7812DCDA2Q-3G             *
*  7812DCDA2Q-3G-AA          7812DCDA2Q-3G-AES4        *
********************************************************

********************************************************
*  Note: Customers must reset their module to the      * 
*        factory defaults after upgrading              * 
********************************************************

version 4.02 build 1  (January 15, 2019)
-------------------------------------------------------
Features Additions 
============================
- WST OP42/47 Processing (standard feature - not optioned based)
- ANC PassThru

Resolved Issues
============================
- DA / PGM output now stable after returning from loss of video when operating with Input Video Standard control configured to a specific video standard instead of 'auto' mode.
- Resolved card reboot loop when operating with fixed input video standard and sourcing device with different video standard.
- Resolved DA output failure intermittently on power-up
- Full pass through of all ANC packets for SD->SD operating mode
- Improved down-scaling filter performance
- Improved output phase when locking to genlock
- Frame status LED now only faults when BOTH video paths do not have video, or genlock is invalid
- Composite video now aligned to reference when all outputs are composite
- SD-VBI waveforms are not authored during SD->SD pass through
- Fixed boundary condition in Composite Hue control


version 2.03 build 2  (October 9, 2013)
-------------------------------------------------------
- corrects DA output when powered up with 1080i/59.94Hz input video 
- corrects Traps/Fault Status
- Correctly reports video delay for SD input to SD output
- CC Fault Traps CEA708 Service 1 fixed

version 2.01 build 2  (January 11, 2013)
-------------------------------------------------------
- 23.98PSF support
- 60Hz support
- Fixed initialization to default to 525i/59.94 output on newly manufactured boards.

version 1.08 build 67  (November 1, 2010)
-------------------------------------------------------

- corrected bottom lines of o/p video delayed in case of 1080i to 525i for some aspect ratio’s.
- Added ability to use video proc with SD input