Version history for KeyLog Tracker 3 Version 3.2.09 Apr 27, 2011 ******************************* Bugs Fixed ---------- - Firmware upgrade does a better job of suggesting the correct file to send when there are multipe versions in the Firmware Folder - Add Audio TC rate control to Afterburner when it is the Capture Device. Allows Audio Rate to be set to match the incoming audio LTC rate Note: Tracker will still not capture correctly if this rate control does not match the incoming LTC rate. There is no way for Tracker to read back the incoming LTC rate from the Afterburner - Fixed issue where ABS frames was not being initialized in the Afterburner capture when there is no FILM ANC data. ABS Frms is driven from Video Frames in this case - Fixed issue where ALE file missing FPS values when Film Gauge not set (caused by adding manual events with Afterburner Capture mode) Features added -------------- - Changed ALE file to put Camera TC into Aux TC 24 column and 24FPS Sound timecode in Sound TC 24 column for SD projects - Changed ALE file to put Camera TC into Auxiliary TC2 column and 24FPS Sound timecode in Auxiliary TC1 column for HD projects - KKID V 1.13 Added Fuji ETERNA Vivid250D (8546/8646) - Added "Debug Log" Menu item to Tools menu. Sets Debug Log Level while Tracker is running. Log Level is now saved in the Tracker.ini file. The command Line parameter to set Log Level is ignored unless Tracker.ini does not exist (on a clean install) In this case, the command line value is stored in the INI file for the next time. Version 3.2.04 Dec 17, 2009 ******************************* Bugs Fixed ---------- - Properly set ENCODER output Video Standard in config - was not being saved previously - Properly display Text2 and TExt3 windows on Encoder in SD video modes - properly adjust length of text windows based on raster width - change raster horiz size for 720P to 32 Features added -------------- - Displays NET ID of devices in Encoder Status window Title Bar - Allows Event and Production window to not open when in Afterburner only mode and Project is opened - Encoder Status windo may now be opened continuously when no project are opened - KKID V 1.11 added Fuji ETERNA Vivid 500 (8547, 8647) Version 3.2.03a July 15, 2009 ******************************* Bugs Fixed ---------- - Fix install set to include file MSSTDFMT.DLL which was previously missing. Version 3.2.03 April 2, 2009 ******************************* Bugs Fixed ---------- - Fix bug where Audio and Video Offset controls on Afterbuenr are hidden when User Bits set to anything nbut Not used. - Limits TAG source for HD9155Q when reading Film ANC or ATC. Tags must come from Film ANC. Allows multiple sources in HDSD9155Q Features added -------------- - allows KK and INk windows to be positioned 1 mode char posn to the right when outputs video std is 1080p/24 as there is no pulldown character Version 3.2.01 March 19, 2009 ******************************** Full Release version Bugs Fixed ---------- - Changing HD/SD video standards in hardware FP menus while a project is open prompts a message in Tracker but won't let you change the resolution fix closes project (after prompting) to let you change resolution - Fix typos on Tools/Option/Hardware form - Fix line range of ANC generator for 720P formats (9-25) - fix line range of Matte so it allows only active lines - fix bug in detecting devices when none are found and no devices are defined. - sends VTRoll and Production window text info with config when project is open. Also sends VTroll when Events form activated - fix bug retrieivng 5550 Firmware version Features added -------------- - KKID V 1.10 added two Kodak Stocks - 5207/7207 (EN) and 5260 (EU) - allows more choices in mapping of Afterburner when Film ANC is the input for Video Time - added support for 24 FPS audio time code to ALE file - appears in "Auxiliary TC1" column for HD ALE files and "Aux TC 24" for SD ALE files. - change name of Camera TC in UB renamed to CAMERA TC 24 Column in ALE file export Version 3.1.65 July 28, 2008 **************************** - this version requires new firmware for the HDSD9045TR and HDSD9155Q to implement these features - minimum build 2697 for HDSD9045TR, Build 3859 for HDSD9155Q, Build 456 for NETIF - minimum build 1914 for HD915xQ series Afterburners or build 3463 for HD915x (Non-Q) series Afterburners (reguired for support of CDL in ANC) Bugs Fixed ---------- - Path names of projects not being found - FTP firmware upgrade form browse for files and folders fixed - Fix random location of forms When running Tracker on a PC with multiple display adapters - Fix function that reads IP addresses from PC on startup - shows problems on some Window XP machines - Error shows as "Tracker (10) This array is fixed or temporarily locked" - may also cause a GPF with Tracker crashing without warning. - fix bug where Options screen only shows High Def resolution when only device is HDSD9155Q - fix bug with FLEX 1007 format timecode values for HD edit out timecode - shows 30 FPS instead of input rate. - fix bug where 'Resolution' of the project seems to randomly get changes from HD to SD - fix problem where some of the character windows do not appear in the list of available windows from time to time (removes old unused window names) - fix bug where Film Rate is captured as a number only - happens when Logging With PS Afterburner - causes problems creating ALE and FLEx files old project files are automatically repaired when they are converted to verion 3.1.64 Features added -------------- - Projects now have an 'Owner' (user ID when the project was created) - When projects are opened by someone other than their Owner, the project configuration and Events are Read only. - Project Owner can be changed only by users who have Owner Change Priveleges. When the database is converted for version 3.1.62, only users with Admin proveleges are given Project Owner Change privileges - User privileges can be changed by any user with Admin privileges. - Add CDL windows for Slope, Offset, Power, Saturation - a new CDL check box allows you to disable these windows - Each time an event is started TRacker requests a refresh of the CDL colour data from the colour corrector Only occurs when the CDL Window is open. - Tracker sends CDL Info to HDSD9045TR when it is entered by the user or received on the UDP port. - add CDL in ANC check box on Outputs Tab of config to enable encoding CDL data by the HDSD9045TR - requires new firmware in Afterburners to read ANC with CDL data - Add programmable matte on PGM and MON outputs of HDSD9045TR. Tracker has controls on the Video TAB of the config screen - Support for HD timecodes in Lightworks ODB file - Debug trace logging added. Set command line parameter "logLevel=" to set log mode Loglevel 1=Errors, 5= Warnings, 10=Info (default), 15=Debug, 20=Verbose dump - add ability to turn off checking for 'Orphan' character windows (ones that are not attached to a config) when starting Tracker - add a line in the Tracker.ini file "CheckWindows=No" - without the quotes - Support for 24 FPS Audio Time Codes - Support for 1080p/24sF video standard in HDSD9045TR (In manual Video Standard only) Version 3.1.52 Feb 15, 2008 **************************** Bugs Fixed ---------- - Fix bug sending LUT tables above 10 to the hardware - fix bug where COM port not retained in Tools\Options\Devices tab - fix bug finding the first device on a fresh install(Network mode) - fix bug where Afterburner "Film Data" combo defaults to "Not being Used" - fix bug causing Run-time error if duplicate devices chosen in Network mode - fix bug where Options screen only shows High Def resolution when only device is HDSD9155Q - fix bug with FLEX 1007 format timecode values for HD edit out timecode - shows 30 FPS instead of input rate. Features Added -------------- - Allow user to disable prompts to change to Encoder communications when capturing, updating CDL and production windows Saves setting in Tracker INI file - Add support for SD to SD mode in HDSD9155Q Afterburners - Added 5550 Control screen and command support for 5550 Control through HDSD9045TR - Added command support to send CDL data to the HDSD9045TR for inclusion in RP215 - Each time an event is started TRacker requests a refresh of the CDL colour data from the colour corrector Only occurs when the CDL Window is open. Version 3.1.45 Nov 15, 2007 **************************** Bugs Fixed since 3.0.56 ---------------------- - Fix bug in ALE output of 3 perf files - exchanges Perf and ASC_SOP data columns - DAO error while converting KLOGUSER file from previous version - added Parameter 1-3 to all telecine setups - to fix issues with intermittent bouncing of Film Timebase scan numbers - a value of 20 moves the film timebase sync point so it always processes in the correct order - requires KlogSys.mdb version 3.0.64 or later - fix bug where Columns in Event Log grid were not displaying properly - remove unused Film Frame handling and Virtual slate modes - requires KlogSys.mdb version 3.0.65 or later - "Error Capturing Event Out Point. DAO.Recordset(3021) No Current Record." message occurs at the out point. This occurs the first time you capture in a new project or a new VTRoll. - fix bug that did not save LTC Out time/UB mapping values from Configuration - fix bug with positioning of TEXT2 aND TEXT3 windows - fix bug in installation package - user message says that KLOGSys is corrupted - fix bug in group edit of events - Fixed problem sending Parameters twice - Fixed some issues with editing timecodes in events - Fixed issue with ALE from 9155QPS capture not outputting FPS setting properly - Fixed issue with Tracker crashing when adding events - Tag events were not being created - Fixed issue with Tracker crashing when Text windows are centered - Fixed issue with converting project files with Dummy Event tables - causes 'Field not in this collection' error - Fixed issue loading System configs into existing projects - only displayed 50I configs to load. - Fixed issue where Matrix Code mode not available on the Config screen - Fixed Run time error 3021 when adding devices in a first-time install on a new PC - Fixed DAO error when converting 2.0.xx KlogUser files - Fixed bug that sends last line of Text parameter files twice Features Added since 3.0.56 --------------------------- - Added support for tracing CDL parameter messages over UDP network interface set CDLTrace=True in Communication section of Tracker ini to enable. Trace will be written to CDLTRace.txt file in Tracker install folder. - hide dummy events in Events Form - Protected CDL data values against accidental editing in Event Edit form. User must press an additional button to change the captured ASC CDL values - Added support for receiving ASC CDL parameters over UDP network interface Supports ASC version 1.0 schema - warns about using default Sys Parm for 6 Hz input on Afterburner - Defaults to network firmware upgrades for devices that support it and are already connected via the network. - Add mappings for ANC data in HD Dailies modes - Add Telecine types for HD Dailies mode - Support for Network Communications to HDSD9045TR and HDSD9155Q set NetEnabled=True in Tracker INI file to enable network communications - Allow Tracker to run in Network mode when no COM ports available - Allow Camera Roll to be used instead of VT Roll for Tape Name in ALE Export. (New check box on Export Screen) - Allow Retry when sending commands requiring responses set by 'Retry Max' parameter in Tracker ini. Default = 2. Version 3.0.56 May 2, 2007 *************************** - first release of Tracker version 3 Major Features Added since 2.0.24 ********************************* - Many of the features that were controlled with system parameters are now controlled directly in Tracker - Added support for HDSD9045TR and HDSD9155Q - Auto Video Standard check box added to Option Screen - Project resolution set in Config screen - Video Tab added to configurations - set input and output video types (4:2:2 SDI, 4:2:2 HDSDI, 4:4:4 HDSDI, etc.) - set input and output video standards (1080p/23.98sF, 525i/59.94, 625i/50, etc) - set 24Hz pulldown reference source and A frame offset - set 720p framing and pulldown reference source - set active Lookup Table (LUT) for 9045 series and where LUT is applied - set behaviour when no video input present (blue, black, pass input, etc.) - Fractional Frame rates (e.g. 23.98, 59.94 etc.) explicitly shown in Video standard list and in status LEds at the bottom of the screen when applicable. - Outputs Tab of configuration screen - allows uset to choose ANC Generation, ANC deletion - Windows tab of configuration screen - sort order that window names appear in the list of windows - can select only certain groups of windows to display - Film: KeyKode, Ink Numbers, Abs Frames, etc. - Camera/Lens: Pan, Tilt, Roll, Focal Length, etc. - Production: Scene, Take, Camera Roll, Sound Roll, etc. - add Text2 and Text 3 windows for HDSD9045TR and HDSD9155Q - user friendly names for Debug Windows in Window Edit Detail dialog - user friendly names for General Purpose I/O Pins in Parameter Edit Detail dialog - user friendly names for System and Telecine Parameters in Parameter Edit Detail dialog - supports up to 9 recently used projects - Add the line "DefaultUser=True" in the [General] section of Tracker ini file - allows user to bypass user login and just login with the last user name - Add the line "SendCharOn=False" in the [General] section Tracker ini file - does not force the character generator to come on when a config is sent to the hardware. - It leaves the last Char On/Off setting that was active before the config was sent. - Added check box on Tools\Options screen General tab to enable general warning messages such as when communications is lost, or video standard changes and when config needs to be sent again. Useful for production applications where equipment is being powered on and off regularly - allows user to ignore routine warnings This setting is saved in the user.ini file so can be done on a user by user basis. - Added capability to output HD Timecodes in ALE and Flx files - Default file naming convention for Export files - added _HD when HD timecodes are output - Added extra 300/301 records in Flx1007 files for original Timecode in Video Dailies applications - Added support for ORWO film stocks. Needs KKIK version 1.8 or later - Added suport for ASC Colour Decision values - new form to enter these values, they are output into the FLEX and ALE files.