Interact with this product in a Layout Tool:
The 2400ODU-8 is a compact, weatherproof enclosure that provides a convenient, pre-integrated package for fiber transport of satellite and other signals within the extended L-Band range. The 2400ODU-8 can house up to 8x active fiber transmit (2408LT) or receive (2406LR) modules and an 8-channel power supply (2400PSUA-8).
The 2400ODU comes with mounting brackets to be conveniently mounted directly on or near the antenna structure.
This turnkey solution provides fiber transport of up to 8x RF signals over individual fibers or multiplexed over a single fiber, and power the connected LNBs.
The 2400ODU-8 also features built-in surge protectors for lightning protection and has options for integrated fiber multiplexer, 10MHz reference transport, RF protection switching, splitters, Bias-Tee and more.
特点
- Minimizes length of coax run from LNB
- Fiber link provides electrical isolation between antenna and facility, mitigating ground loop and lightning issues
- Convenient, time-saving pre-integrated package
- Weather-sealed enclosure with durable powder coat finish
- Wide operating temperature range
- Lightning protection included on RF inputs/outputs
- Knockouts provided for termination of AC power and fiber conduits
- Each fiber module provides a coaxial monitoring output
- LNB current limit and short circuit protection
- LNB current monitoring for advance warning of LNB failure
- Serial and Ethernet data transceivers available for remote antenna control, monitoring and other applications
- All modules are field-replaceable and hot-swappable
- SmartMON™ monitoring without a separate data connection
- Redundant power supply
指标|
RF Specifications | |
|---|---|
| Frequency Range | 50 – 3000MHz (10MHz ref. modules available) |
| Input Power Range | -10dBm to -60dBm |
| Noise Figure | 7dB (@ 31.5dB Tx gain) |
| Group Delay | ±0.5ns for 36MHz transponder |
LNB Power | |
|---|---|
| 电压 | 13V/18V DC, off (selectable) |
| Current | 500mA |
| Protection | Short circuit, current limited |
| LO Control | 22kHz on/off (selectable) |
RF Monitor Output | |
|---|---|
| 输出数量 | 1 per RF input/output |
| Output Level | Within ±2.0dB of input signal |
Optical Specifications | |
|---|---|
| Tx Wavelength | 1310nm DFB laser (1550nm and CWDM optional) |
| Rx Wavelength | 1270nm-1610nm |
| Output Power | +2dBm |
| 光敏感度 | -14dBm @ 35dB S/N on a 36MHz carrier |
| Optical Budget | -16dB |
Connectors | |
|---|---|
| RF Connectors | F-Type (BNC optional) |
| 阻抗 | 75Ω (50Ω optional) |
| Fiber Connectors | Female FC/APC |
物理参数 | |
|---|---|
| Without Flanges | 9" D x 16" W x 16" H (229mm D x 407mm W x 407mm H) |
| Knockouts | 2x 0.75" |
| Finish | RAL7035 textured light grey powder coat |
Environmental | |
|---|---|
| 工作温度 | -30 to +80°C |
功率 | |
|---|---|
| 输入数量 | Single or dual (protected) power sources can be accommodated |
| 端口数目 | Dual IEC 320 male input connectors, inside enclosure |
| 电压 | Auto-ranging, 100 – 240V AC |
| Frequency | 47 – 63Hz |
| 功率 | 1A maximum per input |
| 注意 | • For additional information and specifications on the included or companion items, please refer to each individual product datasheet. |
|---|
订购信息|
| 2400ODU-8-B50 | Outdoor enclosure for RF fiber system, BNC 50Ω |
|---|---|
| 2400ODU-8-F75 | Outdoor enclosure for RF fiber system, F-Type 75Ω |
订购可选项 | |
|---|---|
| 注意 | • Standard RF connectors are F-Type 75Ω. |
| • Fiber modules and power supply ordered separately. | |
| 2400PSUA-8 | 8-channel power supply for 2406LR/2408LT series |
|---|---|
| 2400ODU-4GT | Replacement gas tubes for 2400ODU surge suppressors, package of four |
Connector and Impedance Options | |
|---|---|
| -B50 | 50Ω BNC connectors |
| -S50 | 50Ω SMA connectors |
Transmitter/Receiver Ordering Options | |
|---|---|
| 2408LT13 | L-Band/wideband standalone fiber transmitter, SmartMON™, 1310nm DFB laser |
| 2408T13-10MHz | 10MHz standalone fiber transmitter, 1310nm DFB laser |
| 2408LTxx | L-Band standalone fiber transmitter, SmartMON™, CWDM DFB laser |
| 2408Txx-10MHz | 10MHz standalone fiber transmitter, CWDM DFB laser |
| 2408LT13-5V | L-Band/wideband standalone fiber transmitter, 1310nm DFB laser, 5V DC ±0.2V DC power input |
| 2406LR | L-Band/wideband standalone fiber receiver |
| 2406LR-10MHz | Standalone 10MHz fiber receiver, standard sensitivity, F-Type 75Ω, FC/APC connectors |
| 2406BIAST-2 | High-performance dual-channel bias tee, passes through DC and L-Band with 10MHz reference multiplexer |
| 2406BIAST-2-LNB | High-performance dual-channel bias tee, passes through DC and L-Band with 10MHz reference multiplexer, external DC input option for built-in LNB powering |
| 2406BPX-RF | 2x1 standalone RF protection switch, 10 – 2250MHz, DC passing, 75Ω F-Type connectors |
| 2406ET13-F2+SC | Ethernet transceiver, dual fiber, 1310nm Tx, single-mode fiber only |
| 2406DT13-F2+SC | Data Transceiver, dual fiber, 1310nm Tx, single-mode fiber only |
Mux/Demux Ordering Options | |
|---|---|
| 3400CWDM-M4-AP-SA | Standalone 4-channel CWDM mux, 1510-1570nm, LC/APC connectors |
| 3400CWDM-D4-AP-SA | Standalone 4-channel CWDM demux, 1510-1570nm, LC/APC connectors |
| 3400CWDM-M8-AP-SA | Standalone 8-channel CWDM mux, 1470-1610nm, LC/APC connectors |
| 3400CWDM-M8LB-AP-SA | Standalone 8-channel CWDM mux, 1270-1450nm with expansion port, LC/APC connectors |
| 3400CWDM-D8-AP-SA | Standalone 8-channel CWDM demux, 1470-1610nm, LC/APC connectors |
| 3400CWDM-D8LB-AP-SA | Standalone 8-channel CWDM demux, 12 |