Interact with this product in a Layout Tool:
The 7700ADA7 Analog Distribution Amplifier is a general-purpose amplifier for distributing analog video signals. The 7700ADA7 features one balanced input with seven outputs. The 7700ADA7 amplifier has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that are less than 2V p-p.
The 7700ADA7 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
特点
- 75Ω or high impedance input (jumper selectable)
- High common mode range and common mode rejection ratio (CMRR)
- Gain control
- Jumper selectable AC or DC coupling
- Looping feature with external "T" connector
- Consistent input impedance if card power is lost
指标|
Analog Video Input | |
|---|---|
| 标准 | Any analog video format, up to 2V p-p and 30MHz bandwidth |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| Common Mode Range | > 6V p-p |
| 共模抑制比 | > 70dB to 1kHz |
| Signal Amplitude | 2.5V p-p max |
| 阻抗 | 75Ω terminated, 35kΩ Hi-Z (jumper selectable) |
| Coupling | AC or DC (jumper selectable) |
| 反射损失 | > 40dB to 10MHz, > 30dB to 30MHz |
Analog Video Outputs | |
|---|---|
| 输出数量 | 7 per card |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| Output Impedance | 75Ω |
| Gain Control Range | ±5dB |
| DC level | < ±100mV (DC Coupling active) |
| 频率响应 | < ±0.05dB (to 5.5MHz) |
| 微分增益 | < 0.17% |
| 微分相位 | < 0.19° |
| C/L Gain Inequality | < ±0.1% |
| C/L Delay | < ±2ns |
| Output Isolation | 42dB to 10MHz, 32dB to 30MHz |
| Output Return Loss | > 40dB to 30MHz |
| Noise Performance | < -78dB RMS NTC7 weighting, < -70dB RMS 15kHz to 5.5MHz |
电气 | |
|---|---|
| 电压 | +12V DC |
| 功率 | 4.6 watts |
| EMI/RFI | Complies with FCC Part 15, Class A, EU EMC Directive |
物理参数 | |
|---|---|
| 插槽数 | 1 |
订购信息|
| 7700ADA7 | Analog Video Distribution Amplifier |
|---|
订购可选项 | |
|---|---|
| 注意 | • Rear plate must be specified at time of order - eg: [model]+3RU |
| Rear Plate Suffix | |
|---|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
| +SA | Standalone Enclosure Rear Plate |
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| 7701FR | 1RU Multiframe which holds 3 single slot modules |
| S7701FR | 7700 Series Standalone Enclosure |