Interact with this product in a Layout Tool:
The 7700R2x2-HD Supports: HD/SD-SDI and ASI TS Monitoring with Smart Switch Protection
The 7700R2x2-HES Supports: HD/SD-SDI Monitoring with Smart Switch Protection and Embedded Clean Switch
The 7700R2x2 series modules are bypass protection routers for high definition 1.5GB/s or standard definition 270MB/s serial digital video signals. These modules have two SD/HD compatible inputs signals (program and back up) that support all popular ST 292-1 video formats as well as 525/625 line SMPTE ST 259-1 video formats. These modules also provide three re-clocked primary outputs, and one re-clocked backup output. Based on a programmable set of input signal monitors, the main program or the back-up input signals can be automatically routed to the primary program outputs to ensure the delivery of a valid program output in the case of an input signal fault. Switching can also be controlled and monitored using module GPIOs, card edge controls or remotely using either network control panels (CP-2116E, CP-2232E) or VistaLINK® PRO. The program output is bypass relay protected and provides protection on the program path. If the module is removed from the enclosure or power to the module is lost, the program path is maintained.
The 7700R2X2-HES incorporates Evertz proprietary SoftSwitch™ technology with full audio proc for clean video and "popless" embedded audio switching. Line synchronizers on the video inputs can accommodate differences in timing of up to ±1/2 a line on the video inputs. The 7700RD2X2-HD provides two monitoring down-converted outputs.
The 7700R2x2-HD provides additional MPEG-2 feed redundancy switching. By providing automatic smart switching of the main signal to a back up signal, the 7700R2x2-HD offers protection to digital compressed signals. The user can customize all monitored and switching rules to meet Broadcast, Cable, Satellite and IPTV needs.
The 7700R2X2-HD and 7700R2X2-HES occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
特点
- Support for HD and SD SDI inputs per ST 292-1 and SMPTE ST 259-1
- Auto sensing of HD and SD input formats
- Supports both 525i/59.94 or 625i/50 SD video formats
- Automatic change-over based on programmable input signal monitors
- Generation of three re-clocked program outputs and one preview output (HD if HD inputs are applied, SD if SD inputs are applied)
- GPI control inputs for manual routing control
- GPO status outputs for reporting selector cross-point status
- Card edge menu control for configuration of operating modes
- Card edge LEDs for reporting signal presence, router state, module status
- Remote monitoring through NCP panels or VistaLINK® PRO
- Bypass relay protection on program output
- Controllable switch point when a 同步锁相 reference is provided
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7800FC VistaLINK® Frame Controller module in slot 1 of the frame
Additional features on 7700RD2x2-HD model only
- Program and preview monitoring SDI outputs (down-converted from HD if HD input applied, reclocked SD if SD input applied)
- Support for 16:9 letterbox, 4:3 center crop, and 4:3 anamorphic squeeze aspect ratio conversions
- HD to SD color space conversion (ITU rec. 709 to ITU rec. 601)
Additional features on 7700R2X2-HES model only
- Integrated SoftSwitch technology for clean video and "popless" embedded audio switching
- Dolby E® compliant
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7800FC VistaLINK® Frame Controller module in slot 1 of the frame
Additional Features on the 7700R2x2-HD only
- TR101290 monitoring bitrate measurement and component matching test on all inputs
- Smart configuration of error threshold and switching rules to avoid false switching
- Complete TS data rate measurement with user settable measurement windows
- Essential TS monitoring including:
- TS Loss
- Sync Byte Error
- Bitrate Analysis
- PIDs List Monitoring
- Continuity Count
- PAT Monitoring
指标|
串行视频输入 | |
---|---|
标准 | Auto-detects standard 1.485GB/s ST 292-1 (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) SMPTE ST 260-1, SMPTE ST 274, SMPTE ST 296, SMPTE ST 349-1 (HD or SD carrier) 270MB/s SMPTE ST 259-1 (525i/59.94 or 625i/50), DVB-ASI (7700R2x2-HD only) |
端口数目 | 2 BNC per IEC 61169-8 Annex A |
Input Equalization | Automatic to 100m @ 1.5GB/s with Belden 1694A or equivalent cable |
反射损失 | > 20dB up to 270MHz > 12dB up to 1.5GHz |
Reclocked Serial Video Router Outputs | |
---|---|
标准 | Same as input |
输出数量 | 3 Program outputs reclocked, (1 output is bypass relay protected) 1 preview output |
端口数目 | BNC per IEC 61169-8 Annex A |
信号电平 | 800mV nominal |
直流偏置 | 0V ±0.5V |
上升/下降时间 | |
HD | 200ps nominal |
SD | 900ps nominal |
过冲 | < 10% of amplitude |
反射损失 | > 20dB up to 270MHz > 15dB at 1.5GB/s |
抖动 | < 0.16UI (HD) or < 0.10UI (SD) |
Downconverted Serial Video Outputs7700RD2x2-HD only | |
---|---|
标准 | SMPTE ST 259M-1, 270MB/s |
输出数量 | 1 Program 1 preview |
端口数目 | BNC per IEC 61169-8 Annex A |
信号电平 | 800mV nominal |
直流偏置 | 0V ±0.5V |
Rise And Fall Time | 750ps nominal |
过冲 | < 10% of amplitude |
反射损失 | > 15dB at 270MB/s |
抖动 | < 0.2UI |
同步锁相 Input | |
---|---|
Type | NTSC or PAL Color Black 1V p-p HD 三电平 Sync |
端口数目 | BNC per IEC 61169-8 Annex A |
Termination | High impedance or internal 75Ω (jumper selectable) |
GPIO Control Port | |
---|---|
输入数量 | 2 |
输出数量 | 2 |
Type | Opto-isolated, active low with internal pull-ups to +5 or +12V (jumper settable) |
端口数目 | 6-pin removable terminal block |
信号电平 | Closure to ground |
Input to Output Processing DelayHD input video on 7700RD2x2-HD only | |
---|---|
Downconverter Video Delay | Approximately 1 to 2 frames depending on input video format, processing mode |
电气 | |
---|---|
电压 | +12V DC |
功率 | |
7700R2x2-HD | 10 watts |
7700R2x2-HES | 10 watts |
7700RD2x2-HD | 14 watts |
EMI/RFI | Complies with FCC regulations for class A devices Complies with EU EMC directive |
物理参数 | |
---|---|
插槽数 | 1 (7700R2x2-HD, 7700R2x2-HES) or 2 (7700RD2x2-HD) |
订购信息|
7700R2x2-HD | 2x2 HD/SD Modular Bypass Protection Router |
---|---|
7700R2x2-HES | 2x2 HD/SD Modular Bypass Protection Router with SoftSwitch™ |
7700RD2x2-HD | 2x2 HD/SD Modular Bypass Protection Router with dual HD Downconverter |
订购可选项 | |
---|---|
注意 | • Rear plate must be specified at time of order - eg: [model]+3RU |
+IG | Integrated IntelliGain™ Audio and Loudness Processor (on 7700R2x2-HES only) |
---|---|
+BPRP | Bypass relay protection for preview output (In addition to program output, 7700R2X2-HD and 7700R2X2-HES only) |
Rear Plate Suffix | |
---|---|
+SA | Standalone Enclosure Rear Plate |
+3RU | 3RU rear plate for use with 350FR, 7700FR-C, 7800FR or 7801FR Multiframes |
Enclosures | |
---|---|
350FR | Portable Multiframe which holds 7 single slot modules |
7700FR-C | 3RU Multiframe which holds 15 single slot modules |
7800FR | 3RU Multiframe which holds 15 single slot modules |
7801FR | 1RU Multiframe which holds up to 4 single slot or 2 dual slot modules |
S7701FR | 7700 Series Standalone Enclosure |
附件 | |
---|---|
7800FC | VistaLINK® Frame Controller |
CP-2116E-H | Remote Control Panel |
CP-2232E | Remote Control Panel |