Skip to Main Content

7700TPI

VistaLINK® Third Party Interface Module

Interact with this product in a Layout Tool:

The 7700TPI VistaLINK® module links third-party equipment and Evertz VistaLINK® Network Management System (NMS). Third-party equipment with fault alarming capabilities via General Purpose Outputs (GPO), serial RS-232/422/485 connection, or Ethernet can communicate fault alarm conditions to the VistaLINK® application software through the 7700TPI to SNMP translator thereby extending fault monitoring capabilities across the broadcast network.

The 7700TPI comes equipped with 4 RS-232/422/485 serial ports and 1 10/100 Mb Ethernet port. These ports can also be utilized to communicate and provide remote control to third-party equipment.

The 7700TPI module is also equipped with 8 General Purpose Outputs (GPO) and can be utilized to relay a state level from the VistaLINK® system to connected gear. Configuration changes or additional fault alarming are also possible through this interface.

The 7700TPI module fits conveniently into Evertz's universally installed 7800FR frame and provides a cost-effective and space-efficient third-party interface (TPI) solution.

VistaLINK® offers remote monitoring, control and configuration capabilities via Simple Network Management Protocol (SNMP) giving the flexibility to manage operations, including signal monitoring and module configuration from SNMPcapable control systems (Manager or NMS).

特点|

  • 20 opto-isolated General Purpose Inputs (GPI)
  • Enabled GPI alerts translated and reported to Network Management System (NMS) user interface via SNMP
  • Selectable +5V or +12V supply for driving GPI over longer cable runs
  • 8 relay closure General Purpose Outputs (GPO)
  • 4 serial ports RS-232/422 selectable
  • GPI/GPO/Serial connections easily accessed through pin-headers (Phoenix Terminal Blocks) on rear plate
  • Modular, conveniently fits into 7800FR 3RU frame
  • Module status LED and simple GPI input diagnostics
  • Frame status trigger
  • VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame - Frame Controller built-in

指标|

General Purpose Input

输入数量 20
Type Opto-isolated, active low with jumper selectable +5V or +12V supplied voltage
端口数目 Phoenix Terminal Block
信号电平 Jumper selectable +5V or +12V

General Purpose Output

输出数量 8
Type "Dry Contact" relay closure
端口数目 2 pins per output on Phoenix Terminal Block
信号电平 Normally closed and normally open

Data Input Serial Port

Number of Ports 4 RS-232 or 3 RS-422
端口数目 Phoenix Terminal Block pins
波特率 User selectable, up to 115200 bps

电气

电压 +12V DC
功率 < 6 瓦
EMI/RFI Complies with FCC Part 15 Class A, EU EMC Directive

物理参数

插槽数 2

订购信息|

7700TPI VistaLINK® Third Party Interface Module
7700TPI-TRI2CDI Emergency Alert System Trilithic to CODI Protocol Translator

订购可选项

注意 Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes

Enclosures

350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules