Skip to Main Content

7703PA, 7703PA-LNB, 7703PA-2, 7803PA-2-LNB2

RF Amplifier with Slope Compensation

Interact with this product in a Layout Tool:

The 7703PA series provide amplification of RF signals in the satellite extended L-Band range. Adjustable slope compensation is included. Typical applications include amplification and slope compensation to boost weak signals, drive long coax runs or provide a high power signal for passive distribution systems.

All models occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

特点

  • Can be used as a wideband amplifier without slope compensation for signals from 40 – 2300MHz or as an amplifier with slope compensation for extended L-Band signals from 950 – 2150MHz
  • Wide dynamic range (-10 to -60dBm)
  • Protocol independent - handles all modulation formats
  • Fully hot-swappable from front of frame
  • Comprehensive signal and card status monitoring via four digit card edge display
  • Up to 30dB gain, adjustable in 0 – 5dB steps
  • AGC mode with adjustable target level to maintain a constant output level with varying input
  • Cable slope compensation, adjustable up to 15dB in 1dB steps
  • RF input power monitoring
  • Remote monitoring through SNMP and VistaLINK® capability
  • 7703PA

  • Single channel amplifier
  • 7703PA-LNB

  • Single channel amplifier with built-in LNB power up to 400mA
  • LNB power is 13/18V DC adjustable with built-in current limiting, current monitoring and 22kHz tone for LO control
  • 7703PA-2

  • Dual channel amplifier
  • 7803PA-2-LNB2 (Must be used with 7800FR or 7801FR)

  • Dual channel amplifier with built-in LNB power up to 400mA
  • LNB power is 13/18V DC adjustable with built-in current limiting, current monitoring and 22kHz tone for LO control

指标|

RF Input

输入数量
7703PA 1
7703PA-LNB 1
7703PA-2 2
7803PA-2-LNB2 2
端口数目 BNC per IEC 61169-8 Annex A (F-Type optional)
阻抗 75Ω (50Ω optional)
反射损失
950 – 2150MHz > 14dB
40 – 2300MHz > 10dB
Frequency Range
950 – 2150MHz With slope control
40 – 2300MHz With no slope compensation added
Input Power Range -10dBm to -60dBm

LNB Power

电压 13V DC, 18V DC, off (selectable)
Current 400mA
Protection Short circuit, current limited
LO Control 22kHz on/off (selectable)

RF Output

输出数量
7703PA 1
7703PA-LNB 1
7703PA-2 2
7803PA-2-LNB2 2
端口数目 BNC per IEC 61169-8 Annex A (F-Type optional)
阻抗 75Ω (50Ω optional)
反射损失 > 20dB
Gain 0 – 30dB, adjustable in 1/2dB steps
Slope Adjustable, up to 15dB in 1dB steps across 950 – 2150MHz
IMD < -45dBc (0dBm out, 10dB gain)
< -50dBc (0dBm out, 20dB gain)
< -55dBc (0dBm out, 30dB gain)
P1dB +3dBm
频率响应 No slope applied
950 – 2150MHz ±0.5dB
40 – 2300MHz ±2dB

电气

电压 +12V DC
功率
7703PA 6 watts
7703PA-LNB 15 watts
7703PA-2 12 watts
7803PA-2-LNB2 18 watts

物理参数

插槽数 1

订购信息|

7703PA Single channel RF power amplifier with slope compensation, VistaLINK® support, 75Ω BNC connectors
7703PA-B50 Single channel RF power amplifier with slope compensation, VistaLINK® support, 50Ω BNC connectors
7703PA-S50 Single channel RF power amplifier with slope compensation, VistaLINK® support, 50Ω SMA connectors
7703PA-LNB Single channel RF power amplifier with slope compensation, LNB power, VistaLINK® support, 75Ω BNC connectors
7703PA-LNB-B50 Single channel RF power amplifier with slope compensation, LNB power, VistaLINK® support, 50Ω BNC connectors
7703PA-LNB-S50 Single channel RF power amplifier with slope compensation, LNB power, VistaLINK® support, 50Ω SMA connectors
7703PA-2 Dual channel RF power amplifier with slope compensation, VistaLINK® support, 75Ω BNC connectors
7703PA-2-B50 Dual channel RF power amplifier with slope compensation, VistaLINK® support, 50Ω BNC connectors
7703PA-2-S50 Dual channel RF power amplifier with slope compensation, VistaLINK® support, 50Ω SMA connectors
7803PA-2-LNB2 Dual channel RF power amplifier with slope compensation, LNB power, VistaLINK® support, 75Ω BNC connectors
7803PA-2-LNB2-B50 Dual channel RF power amplifier with slope compensation, LNB power, VistaLINK® support, 50Ω BNC connectors
7803PA-2-LNB2-S50 Dual channel RF power amplifier with slope compensation, LNB power, VistaLINK® support, 50Ω SMA connectors

订购可选项

注意 Rear plate must be specified at time of order - eg: [model]+3RU
Contact factory for mixed 50/75Ω input/output impedance conversion options.
Connector Suffix
+F75 75Ω F-Type
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 7700FR-C, 7800FR or 7801FR Multiframes

Enclosures

7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7801FR 1RU Multiframe which holds up to 4 single slot or 2 dual slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure