See how this modular product fits in a frame:

特点

  • Separates one optical input into 4 or 8 optical outputs
  • 工作带宽在1270nm - 1610nm
  • 从动分离器设计适用于各种比特率
  • 完全可以在正面热插拔而无需光纤的重连
  • 支持单模式光缆
  • 可提供 SC、ST 和 FC 连接
  • 7705DS-4 occupies one card slot, 7705DS-8 occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

* Products to be used ONLY in Single Mode Fiber applications

指标|

光输入/输出

接头 SC/PC 或 FC/PC 母头
波长 1270nm - 1610nm
插入损失
7705DS-4 7dB typical, < 8.5dB maximum
7705DS-8 10dB typical, < 11.0dB maximum
一致性
7705DS-4 < 2.5dB
7705DS-8 < 0.9dB
Directivity
7705DS-4 > 50dB
7705DS-8 > 55dB
光纤尺寸 9µm 单模光纤

物理参数

插槽数
7705DS-4 1
7705DS-8 2

订购信息|

7705DS‑4 Four Channel Optical Splitter
7705DS‑8 八通道光分离器

订购可选项

注意 Retention screws have been added to the rear panels of these units. Please note that rear panels from older MUX DEMUX units will not be backwards compatible with newer rear panel units. (See block diagram for rear panel drawings)
FC/PC 接口选项只在'COMMON'端口上(SC/PC 在余下的光纤 I/O 端口上)
Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SC SC/PC
+FC FC/PC
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes

Enclosures

350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure