Skip to Main Content

7707SVR-2

Dual S-Video Fiber Receiver

Interact with this product in a Layout Tool:

The 7707SVR-2 is a VistaLINK® capable, S-Video fiber receiver for broadcast quality video signals. This single card module accepts a fiber optic input from the companion 7707SVT-2 S-Video Fiber Transmitter, demultiplexes the signals, performs D to A conversion and outputs NTSC or PAL S-Video signals.

The 7707SVR-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

特点

  • Single card fiber receiver for up to two S-Video signals
  • Supports both NTSC and PAL video signals
  • Broadcast quality analog video performance
  • Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
  • Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
  • Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
  • Supports single-mode and multi-mode fiber optic cable
  • Accepts any wavelength in the 1270nm to 1610nm range

指标|

光输入

输入数量 1
接头 SC/PC, FC/PC 母接头
波长 1270 - 1610nm
最大功率 0dBm
光敏感度 -23dBm

模拟视频输出

标准 NTSC, SMPTE ST 170, PAL, ITU-R624-4
输出数量 2 在 7707SVR-2 上
2(每个视频通道 1 个)在 7707SVR-2-2 上
接头 BNC per IEC 61169-8 Annex A
系统频宽 5.5MHz
电平 1.0V p-p (标称), 2V p-p 最大
增益 统一增益标称, 可调 50% - 150%
阻抗 75Ω
反射损失 > 20dB
信噪比 > 70dB
微分增益 < 1.0%
微分相位 < 0.7°
预加重 电缆损耗补偿,可用于最高 250m 的 Belden 1694 (每路输出独立可调)
通带波动
NTSC < ±0.1dB to 4.1MHz
< ±0.2dB to 5.5MHz
PAL < ±0.1dB to 4.8MHz
< ±0.2dB to 5.8MHz
色/亮增益 98% - 103%
色/亮延时
NTSC < 5ns
PAL < 12ns
行时间失真 1.2%

系统性能

7707SVT-2 + 7707SVR-2
视频输入到
视频输出的延迟
< 10µs
音频输入到
音频输出的延迟
< 1.9ms

电气

电压 +12V DC
功率 12 瓦
EMI/RFI 符合 FCC Part 15 Class A, EU EMC 指标

物理参数

插槽数 1

订购信息|

7707SVR-2 Dual S-Video Fiber Receiver, VistaLINK®

订购可选项

注意 Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SC SC/PC
+FC FC/PC
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes

Enclosures

350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure