7725VBI-K-HD

The 7725VBI-K-HD module is a multi-function VBI keyer. Every program input vertical interval video line can be programmed to pass upstream video, blank the line, insert any VBI line from the HD/SDI Key Fill input, insert a selectable VITS (vertical interval test signal) for SD, and insert a Wide Screen Signaling (WSS) and Active Format Description (AFD). The 7725VBI-K-HD allows for up to 70 lines to be programmed. The module provides the capability to store different VBI configurations as presets and recall them from the On-Screen Display or via 8 opto-isolated GPI inputs.

The 7725VBI-K-HD has two re-clocked program outputs and one program monitor output. This unit is often used in critical on-air applications and hence bypass relay protection of the program video path is provided. The 7725VBI-K-HD is setup via the On-Screen Display or VistaLINK®.

VistaLINK® enables remote monitoring, control, and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage operations including signal monitoring and module configuration from SNMP enabled control systems (Manager or NMS) locally or remotely.

The 7725VBI-K-HD occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

特点|

• One serial digital 1.5Gb/s HD input per SMPTE ST 292-1, or 270Mb/s SD input per SMPTE ST 259-C
• Two reclocked HD or SD program outputs
• Video input relay bypass for power failure bypass protection
• One HD input or SD input digital Key video input
• One HD or SD monitor program output with On-Screen Display
• A comprehensive on screen menu is available to configure the various features of the module
• 28 different presets for storing VBI keying configurations
• Up to 70 lines of output video can be programmed
• Up to 16 line patterns may be captured from any key input line and stored in User Memories for later insertion on any VBI line
• Each line of VBI independently programmable to pass, blank, insert from key signal, insert from user memory or insert factory test signal
• On-Air Preset configuration selected with GPI, OSD, or VistaLINK® selection
• Non-volatile memory protects current configuration in case of power loss
• Fully hot swappable from front of frame
• VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7800FC VistaLINK® Frame Controller module in slot 1 of the frame

Applications

Master control output chain protection

Typically there are several units "chained" together on the output of a master control switcher. Units such as caption encoders, AMOL encoders, VITS inserters, data encoders, etc. are typically connected in series so that if one unit fails the network output will fail. The 7725VBI-K-HD allows you to have one point of insertion in the program output path.

VANC Bridging

Some processing devices modify or destroy VBI data such as captioning or VITC. An example of this occurs with some DVE's during a squeeze back application. The 7725VBI-K-HD device will provide a bypass of VBI around the processing device.

VBI Line Shuffler

By providing the same feed to both inputs of the 7725VBI-K-HD the unit will allow the user to modify the VBI and move lines as necessary.

指标|

订购信息|