See how this modular product fits in a frame:

The 7767RGBT-VIP-3G enables the VIP Advanced and VIP-X systems to support a computer graphics input remotely. The transmitter accepts RGBHV and DVI with resolution support up to WUXGA (1920x1200) via a single DVI-I connector (DVI-I to VGA HD-15 dongle provided). The 7767RGBT-VIP-3G card outputs a single serial digital output via coax connector. This output can be fed directly into the VIP Advance via it's coax input or into a VIP-X system as an input to the VIP-X router. For full frame rate high resolution support the output format of the 7767RGBT can be set to 3Gb/s, for standard resolution support the card can operate at 1.5Gb/s to pass through any standard router or DA.

The 7767RGBT-VIP-3G occupies one card slot in the 3RU 7800FR, and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.


  • Supports DVI or RGBHV transport over a single coax
  • Works exclusively with the 7867VIPA and 7867VIPX series multi-image display modules
  • Evertz 3G/1.5G router compatible
  • VESA video resolutions supported up to WUXGA
  • Two channel audio input support
  • Full 24 bits per pixel color resolution
  • Superior digital data transmission
  • Fully hot-swappable from front of frame with no fiber or coax disconnect/reconnect required


Video Input

标准 RGBHV or DVI 1.0, VESA
输入数量 1
Connectors 28-pin DVI with Analog
Video Resolution Up to WUXGA (1920x1200) at 60Hz
Video Bandwidth 500MHz
Color Resolution 24 bits
Analog Output Level 1V p-p (maximum)
Analog Output
阻抗 75Ω
Signal/Noise Ratio > 55dB

Analog Audio Input

输入数量 2
Type 平衡 analog audio
端口数目 6-pin removable terminal block
阻抗 High Impedance (> 20kΩ)
Freq Response ±0.1dB (20Hz to 20kHz)
THD < 0.005% (20Hz to 20kHz)
Channel Phase Diff < ±1°
信噪比 > 85dB
Max. Input Level +24dBu
Signal Quantization 24 bits

Coax Output

标准 Evertz proprietary, selectable serial monitoring output (3Gb/s/1.5Gb/s)
输出数量 1
端口数目 BNC per IEC 61169-8 Annex A


电压 +12V DC
功率 11 瓦
EMI/RFI Complies with FCC Part 15, Class A
EU EMC directive


插槽数 1


7767RGBT‑VIP‑3G RGBHV/DVI + 2 Analog Audio Coax Transmitter


注意 Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR or 7800FR Multiframes


350FR Portable Multiframe which holds 7 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure