Interact with this product in a Layout Tool:
The 7800DA7-MADI reclocking distribution amplifier provides inexpensive distribution of your AES10 MADI audio signals. The 7800DA7-MADI will automatically equalize MADI signals on Belden 1694A coax up to 250m.
The 7800DA7-MADI supports the industry standard 64-channel payload at a sampling rate of 48kHz. Sampling rates up to 96kHz are also supported at various payload capacities as specified in AES10-2003.
The 7800DA7-MADI card edge LED indicators provide quick and accurate assessment of the incoming signal integrity.
The 7800DA7-MADI occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity.
特点
- AES10-2003 standard for MADI audio on 75Ω coax
- Data reclocking provides jitter reduction
- Automatic equalization
- Equalizer and reclocker provide extended cable length compensation (> 250m)
- Seven 75Ω coax outputs
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7800FC VistaLINK® Frame Controller module in slot 1 of the frame
指标|
MADI Input | |
|---|---|
| 标准 | AES10-2003 |
| 输入数量 | 1 |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| Input Level | 0.3 – 0.6V p-p |
| Input Impedance | 75Ω |
| 均衡 | Automatic to 250m with Belden |
| 1694A | (or equivalent) |
| Sampling Frequency | 32kHz, 44.1kHz, 48kHz and 96kHz |
MADI Output | |
|---|---|
| 输出数量 | 7 per card reclocked |
| 端口数目 | BNC per IEC 61169-8 Annex A |
| Output Level | 0.6V p-p |
| Output Impedance | 75Ω |
| 抖动 | 0.1UI |
物理参数 | |
|---|---|
| 插槽数 | 1 |
电气 | |
|---|---|
| 电压 | +12V DC |
| 功率 | 5 watts |
| EMI/RFI | Complies with FCC Part 15, Class A EU EMC Directive |
订购信息|
| 7800DA7-MADI | 1x7 MADI Audio Reclocking Distribution Amplifier |
|---|
订购可选项 | |
|---|---|
| Note | • Rear plate must be specified at time of order - eg: [model]+3RU |
| Rear Plate Suffix | |
|---|---|
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C, 7800FR or 7801FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| 7801FR | 1RU Multiframe which holds up to 4 single slot or 2 dual slot modules |