Skip to Main Content

7880IP-ASI-IP

ASI/SDI IP Encapsulator

Interact with this product in a Layout Tool:

The 7880IP-ASI-IP is a complete hardware based solution to transform ASI to IP, IP to ASI. Module can also pass SD SDI over IP via Dual GigE interface. The 7880IP-ASI-IP can also regenerate IP from IP input with different settings and add FEC. As more providers are trying to deliver contribution and distribution quality video over IP networks, the 7880IP-ASI-IP is capable of bridging traditional compressed world (ASI) with the standard IP networks.

Controlled by the industry leading VistaLINK® PRO, the 7880IP-ASI-IP offers signal providers the capability to encapsulate MPEG-2 transport stream payload to a unicast or multicast standardized IP stream. The 7880IP-ASI-IP is also capable of receiving IP stream and re-create ASI stream. For contribution application, the 7880IP-ASI-IP offers industry standard FEC support for encapsulation or de-encapsulation.

The 7880IP-ASI-IP occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

特点

  • Fully integrated with the Industry leading Evertz VistaLINK® PRO NMS system
  • 2 Independent IP Ports, 1 input and 1 ASI/SDI output
  • ASI/SDI to IP conversion
  • IP to ASI/SDI conversion
  • IP to IP conversion
  • FEC encoding and decoding- Pro MPEG forum code of practice #3- release 2<cop3>
  • Built-in frame controller for control

指标|

Inputs and outputs
  • 1 x ASI/SDI input per DVB TR 101 891/SMPTE ST 259
  • 1 x ASI/SDI output per DVB TR 101 891/SMPTE ST 259
  • Min ASI TS input bitrate 100kb/s
  • Max ASI TS input bitrate 200Mb/s
  • 2 x RJ45 10/100/1000 GigaE I/O for MPEG over IP
  • 1 x RJ45 10/100 control port

Encapsulation parameters
  • IP encapsulation for ASI input
    • MAC 802.3>IPV4>RTP>UDP>MPEG (RTP can be turned on and off)
    • Select 1 to 7 MPEG packets per IP frame
  • Optional FEC encoding (Pro MPEG forum code of practice #3- release 2<cop3>) with L&D following the following range:
    • L*D ≤ 100
    • 1 ≤ L ≤ 20
    • 4 ≤ D ≤ 20
  • IP address (IP, Subnet mask, Gateway) for the source
  • IP address for the destination (Unicast and Multicast)
  • Selection of the source port and destination port
  • Set Local MAC address of the equipment

De-Encapsulation Parameters
  • Join Multicast by providing correct messaging using IGMP
  • Selection of the UDP Ports
  • Auto fail-over to redundant multicast address

Monitored parameters
  • Total Bitrate
  • Null Packet Bitrate
  • TS_sync_loss
  • Continuity count error
  • PID List

电气
电压 +12V DC
功率 11 watts
EMI/RFI Complies with FCC Part 15, Class A
EU EMC Directive

物理参数
插槽数 1

订购信息|

7880IP-ASI-IP IP/ASI/IP Converter

订购可选项
注意 • Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes

Enclosures
350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure