Skip to Main Content

8010TM

SDI 时间码阅读器/发生器,带字符插入器

The 8010TM SDI Time Code Master is a full function time code reader/generator system for serial digital video. The 8010TM is a combination generator/reader for Linear Time Code (LTC) and Digital Vertical Interval Time Code (D-VITC), and contains a high resolution character inserter that can burn the generator or reader numbers directly into the digital program output as well as an optional analog monitoring output. A 16 digit alphanumeric display can be quickly delegated to show the required data.

The 8010TM will accept 525 or 625 line component digital video. The 8010TM's time code generator can be preset to lock to the digital program video either by simple frame locking, or where necessary it will color lock to an analog Color Reference in accordance with the 4 field NTSC or 8 field PAL color sequence.

特点

  • Accepts 4:2:2 (525 and 625 line) digital video signals
  • Serial digital video input provides automatic cable equalization on cable lengths up to 200 meters of low loss coax such as Belden 8281
  • Optional bypass relay for program path protection on power loss
  • Auxiliary serial digital video output (not bypass protected)
  • Passes embedded audio and other ancillary data signals
  • LTC and D-VITC Time Code Reader with line select
  • LTC and D-VITC Time Code generator with line select
  • Character Inserter displays reader & generator time and user bits in the picture
  • Separate positioning of each character window
  • 16 digit Alpha-numeric display, with 16 pushbuttons
  • Serial Remote Control of most functions - Broadcasts reader data or sends it on request
  • Rack mountable
  • Momentary or continuous jam sync modes
  • User bit transfer from reader time or user bits
  • 25 Fps « 29.97 Fps SMPTE drop frame converter
  • Optional composite monitor output converts digital video to analog
  • GPI Remote Control mode allows user to pass remote control contact closure information in VITC user bits
  • Recalculates EDH after VITC and character insertion
  • Optional input bypass relay for power failure bypass protection
  • Optional dual power supply configuration

指标|

Serial Digital Video Input

标准 SMPTE ST 259-C (270Mb/s)
端口数目 1 BNC per IEC 61169-8 Annex A
均衡 Automatic 200m @ 270Mb/s with Belden 8281 or equivalent cable150m @ 270Mb/s when bypass relay is active
反射损失 > 15dB up to 540Mb/s
D-VITC Reader SMPTE ST 266

Serial Digital Video Outputs

输出数量 1 with relay bypass (+BP option)
1 additional output
端口数目 BNC per IEC 61169-8 Annex A
信号电平 800mV nominal
直流偏置 0V ±0.5V
上升/下降时间 900ps nominal
过冲 < 10% of amplitude
反射损失 > 15dB up to 540Mb/s
Wide Band Jitter < 0.2UI
D-VITC Generator SMPTE ST 266

Analog Monitor Video Outputs

with +MON option
标准 Analog composite NTSC if input is 525i/59.94 video
Analog composite PAL if input is 625i/50 video
Connectors 2 BNC per IEC 61169-8 Annex A
信号电平 1V p-p nominal, internally adjustable
直流偏置 0V ±0.1V
反射损失 > 35dB up to 5MHz
频率响应 0.8dB to 4MHz
微分相位 < 0.9°(< 0.6° typical)
微分增益 < 0.9% (< 0.5% typical)
信噪比 > 56dB to 5MHz (shallow ramp)
阻抗 75Ω

LTC Generator

标准 SMPTE ST 12-1
NTSC 2/4 field; PAL 4/8 field menu selectable
NTSC or 24Fps (5010-24Fps only)
Output 3 pin male XLR type
Level Adjustable, 0.5V to 4.5V p-p
Rise Time 40 ±10 ms
抖动 < 2 ms

LTC Reader

标准 SMPTE ST 12-1
Input 3 pin female XLR type
Level 0.2 to 4V p-p, balanced or unbalanced
Speed 1/30th to 70x play speed, fwd and rev, machine dependent

General Purpose Inputs and Outputs

Inputs 6, programmable control functions
Outputs 2, programmable tally functions
端口数目 9 pin female "D"
Type Opto-isolated, active low
信号电平 Pulled up to +5 volts. 3.3V DC provided

Serial Remote Control

标准 RS-232 or RS-422, programmable baud rate
端口数目 9 pin female "D"
Control Firmware upgrade, serial remote control of all functions

电气

功率 Auto ranging 100-240VAC 50/60Hz 40 瓦
Safety TÜV listed
Complies with EU safety directives
EMI/RFI Complies with FCC Part 15 Class A
EU EMC Directive

物理参数

Single Power Supply version
尺寸 19" W x 1.75" H x 7.75" D.
(483mm W x 45mm H x 196mm D)
双通道 7 lbs. (3.2 Kg)

Dual Power Supply version

尺寸 19" W x 1.75" H x 18.75" D.
(483mm W x 45mm H x 477mm D)
双通道 8 lbs. (3.5 Kg)

订购信息|

8010TM SDI 时间码阅读器/发生器,带字符插入器

订购可选项

+2PS 后备电源
+MON 模拟监测选项
+BP 旁路继电选项