Interact with this product in a Layout Tool:
The EMR Data Port Router module occupies 2 slots in a EMX frame and can function as a standalone 48-port router or can interlink modules to expand to a 288x data port router in a single 6RU frame.
Each port is software selectable to be RS-232 or RS-422 to accommodate the devices connected, the EMR-PR48-A will do the translation to connect data flow between RS-232 and RS-422 devices. In addition, each port can be configured for manual or automatic sensing of controlling and controlled devices, as well Sony interface pin is supported.
The EMR-PR48-A also offers signal status monitoring for think like data activity, baud rate, Sony pin state, RX polarity when port is in 422 mode.
Features
- Modular with passive rearplate
- Multi-card interconnect for a 288-port router
- Per-port software control:
- Conversion RS-232 and RS-422
- Auto control sensing option
- Sony interface pin
- Troubleshooting monitor tools:
- Port/device activity
- Baud rate detection
- Sony pin state
- RS-422 RX polarity
- SNMP monitoring
Specifications
Data Input Port | |
|---|---|
| Type | RS-232 and RS-422, selectable |
| 信号电平 | 0.2 – 7.0V p-p |
| Connectors | D50 female |
Data Output Port | |
|---|---|
| Type | RS-232 and RS-422, selectable |
| 信号电平 | 2.0 – 7.0V p-p |
| Impedence | 110Ω |
| Connectors | D50 female |
TDM |
|---|
- Used to expand by interlining EMR-PR48-A modules
Control | |
|---|---|
| Ethernet | 2x RJ-45 |
| Serial | RS-232/RS-422, 2x D9 female |
| Protocol | Quartz |
Frame Reference | |
|---|---|
| Reference Inputs | 2x BNC, analog 525/625 |
| Impedence | 75Ω terminating |
| Connectors | BNC per IEC 61169-8 Annex A |
Ordering Information
| EMR-PR48-A | 48 device ports via D50 connectors, and 4 TDM outputs and 4 TDM inputs via DIN connectors. Supports a mix of RS-422 and RS-232 ports and conversion between the two standards. Supports automatic master/controller routing for VTRs. |
|---|
| Rear Plate Suffix | |
|---|---|
| +6RU | 6RU rear plate for use in 6RU slots |
Enclosures | |
|---|---|
| EMX6-FR | 6RU EMX Router frame which holds 15 single slot modules |
| EMX3-FR | 3RU EMX Router frame which holds 5 single slot modules |
| EMX1-FR | 1RU EMX Router frame which holds 2 single slot modules |
EMX Enclosure Accessories and Options | |
|---|---|
| EMX-FC | Frame controller for EMX Frames, provides Ethernet interface for external control and monitoring |
| +6PS | Redundant Power Supply |
| +3PS | Redundant Power Supply |
| +PS | Redundant Power Supply for EMX1-FR |