Interact with this product in a Layout Tool:

The 7700R16x16 is a small form factor router designed for critical applications where size is limited, whether for existing facilities who have run out of rack space or for trucks and vans. The 7700R16x16 uses up only 3 slots of a traditional Evertz 7700FR and has its own integrated controller. This means five 16x16 routers can fit in just 3RU.

The router is format independent supporting signals from 3Mb/s up to 3Gb/s including SMPTE ST 310, SD-SDI, ASI, HD-SDI and 3G.

The 7700R16x16 router has a number of control options.

  • Control • The 7700R16x16 router is compatible with the existing ranges of Quartz routers, remote control panels and control systems.
    The 7700R16x16 router is a fully independent stand alone router including an internal Frame Controller module which supports a single Q-Link, dual serial ports and an Ethernet port on the rear of the router.
  • Remote Control Panel • Any panel(s) from the entire range of Quartz remote control panels can be used with the 7700R16x16 router connected via Q-Link or Ethernet. (Exceptions: CP-1024E, CP-1040E, CP-2272E)
  • External Third Party Control • The 7700R16x16 router can be remotely controlled via an external third party control device, such as an automation system, when connected to the router's serial or Ethernet ports.
  • Power Supply • The 7700R16x16 is housed in the typical Evertz 7800FR frame and so can be run with dual power supplies ensuring continuous operation.
  • Technical • The 7700R16x16 Router offers a full 3Gb/s bandwidth to handle uncompressed HD signals. Automatic Bit Rate Detection on the input equalizer allows any mix of HD and SD signals in the same unit.


  • Full broadcast specifications
  • Powerful built-in control systems
  • Ethernet, serial RS-422/RS-232 and QLink ports
  • Full VistaLINK® PRO command & control, SNMP
  • Output reclocking On/Off
  • Compatible with all Quartz routers and remote control panels
  • Monitoring output


Serial Video Inputs

标准 SMPTE ST 292-1, SMPTE ST 259, SMPTE ST 310, SMPTE ST 424, ASI
信号电平 800mV p-p nominal
阻抗 75Ω terminating
反射损失 15dB (5MHz - 1485MHz)
Cable equalization Belden 1855A 300m @ 270MHz, 100m @ 1.5Gb/s
Connectors DIN 1.0/2.3

Serial Video Outputs

标准 Same as input (Reclocking)
信号电平 800mV p-p ±10%
阻抗 75Ω terminating
反射损失 15dB (5MHz - 1485MHz)
DC offset 0 ±0.5V
Connectors DIN 1.0/2.3

Switching Reference

Reference inputs Analogue 625 or 525 三电平
Signal level 1V p-p ±3dB
阻抗 75Ω
Switching Line Lines 6/319 (625)
Lines 10/273 (525)
Line 7 (HD)


Q-Link to remote panels
Cable Type 75Ω video cable
Max Length 500m
Signal RS-232/422
端口数目 Terminal block socket
Ethernet RJ45


Supply Auto ranging 100-240V AC, 50/60Hz
Power Consumption 26 瓦
端口数目 Screw Terminals
Redundant PSU Optional


插槽数 3


7700R16x16‑HD 16x16 HD/SD Modular Router
7700R16x16‑3G 16x16 3G/HD/SD Modular Router


注意 Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+3RU 3RU rear plate for use with 7700FR-C or 7800FR Multiframes


7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules