Interact with this product in a Layout Tool:

The 7700R8x8-3G is a small form factor router designed for critical applications where size is limited, whether for existing facilities who have run out of rack space or for trucks and vans. The 7700R8x8-3G uses up only two slots of a traditional Evertz 7700FR and has its own integrated controller. This means that seven 8x8 routers can fit into just 3RU and two routers in the 7801FR

The router is format independent, supporting signals from 3MB/s up to 3GB/s including SMPTE ST 310-1, SD-SDI, ASI, HD-SDI and 3G.

The 7700R8x8-3G router has a number of control options:

Control • The 7700R8x8-3G router is compatible with the existing ranges of Quartz routers, remote control panels and control systems.

The 7700R8x8-3G router is a fully independent, stand alone router. It includes an internal Frame Controller module which supports dual serial ports and an Ethernet port on the rear of the router.

Remote Control Panel • Any panel(s) from the entire range of Quartz remote control panels can be used with the 7700R8x8-3G router connected via Ethernet. (Exceptions: CP-1024E, CP-2272E, CP-1040E)

External Third Party Control • The 7700R8x8-3G router can be remotely controlled via an external third party control device, such as an automation system, when connected to the router's serial port or Ethernet port.

Power Supply • The 7700R8x8-3G is housed in the typical Evertz 7700FR frame and can be run with dual power supplies ensuring continuous operation.

Technical • The 7700R8x8-3G Router offers a full 3GB/s bandwidth to handle un- compressed HD signals. Automatic Bit Rate Detection on the input equalizer allows any mix of 3G, HD and SD signals in the same unit.


  • Full broadcast specifications
  • Powerful built-in control systems
  • Ethernet, serial RS-422/RS-232 and WebEasy via FC
  • Full VistaLINK® PRO command & control, SNMP
  • Output reclocking On/Off
  • Compatible with all Quartz routers and remote control panels
  • 1 GPI and 1 GPO


Serial Video Inputs

标准 SMPTE ST 292-1, SMPTE ST 259-1, SMPTE ST 310-1, SMPTE ST 424, ASI
信号电平 800mV p-p nominal
阻抗 75Ω terminating
反射损失 15dB (5MHz -1485MHz)
Cable Equalization Belden 1855A 300m @ 270MHz, 100m @ 1.5GB/s
Connectors DIN 1.0/2.3, optional HD-BNC

Serial Video Outputs

标准 Same as input (Reclocking)
信号电平 800mV p-p ±10%
阻抗 75Ω terminating
反射损失 15dB (5 – 1485MHz)
直流偏置 0 ±0.5V
Connectors DIN 1.0/2.3, optional HD-BNC

Switching Reference

Reference Inputs Analog 625/525 or 三电平 HD
信号电平 1V p-p ±3dB
阻抗 75Ω
Switching Line Lines 6/319 (625)
Lines 10/273 (525)
Line 7 (HD)


Serial Signal RS-232/RS-422
端口数目 Terminal block socket
Ethernet RJ45


Supply Auto ranging 100 – 240V AC, 50/60Hz
Power Consumption 26 watts
端口数目 Screw Terminals
Redundant PSU Optional


插槽数 2


7700R8x8‑3G 8x8 SD/HD/3G Modular Router


注意 Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+HDBNC Replaces the standard DIN based rear plate with a HD-BNC rear plate
+3RU 3RU rear plate for use with 7700FR-C or 7800FR Multiframes


7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules