Interact with this product in a Layout Tool:

The 7707OO-2-OC and 7707OO-2L-OC are VistaLINK® enabled, optical to optical wavelength shifter/regenerator for telecom and datacom signals. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®.

The 7707OO-2-OC and 7707OO-2L-OC accepts two fiber inputs and provides two optical outputs. All versions accept 1270nm to 1610nm optical input signals on multi-mode or single-mode fiber. The 7707OO-2-OC and 7707OO-2L-OC are available in 1310nm, 1550nm, CWDM and DWDM configurations.

特点

  • Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of other telecom and datacom rates (see specifications)
  • Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
  • Full-Duplex
  • Wide range optical input (1270nm-1610nm)
  • 1310nm, 1550nm and CWDM wavelengths available for optical outputs
  • DWDM wavelengths (ITU-T G.694.1 compliant) also available for fiber link connection
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
  • Detection and display of optical input power and data rate
  • Fully hot-swappable from front of frame
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller

Optical Input Standards (reclocked)

StandardData RateStandardData Rate
TelecomDatacom
OC48/STM162.488Gb/sFiber Channel2.125Gb/s
OC12/STM4622Mb/sFiber Channel1.062Gb/s
OC3/STM1155Mb/sFiber Channel531Mb/s
Gigabit Ethernet1.25Gb/sFiber Channel266Mb/s
  Fiber Channel133Mb/s
  Fast Ethernet125Mb/s
  XAUI3.125Gb/s
  XAUI3.187Gb/s
  ESCON200Mb/s

指标|

Optical Inputs
Rates (non-reclocked) 125Mb/s-3.187Gb/s
端口数目 Female SC/PC, SC/APC
工作波长 1270nm -1610nm
光敏感度
Standard & Equipment Side -22dBm
High Sensitivity (-H) -29dBm
Max. Input Power
Standard & Equipment Side -1dBm
High Sensitivity (-H) -7dBm
光纤大小 62µm core / 125µm overall

Optical Outputs
标准 same as optical input
输出数量 2
端口数目 SC/PC, SC/APC female housing
反射损失 < 14dB
光纤大小 9µm core / 125µm overall
Equipment Side
Wavelengths Standard 1310nm
Output Power 1310nm FP -7dBm ± 1dBm
Line Side Wavelengths
标准 1310nm, 1550nm (nominal)
CWDM 1270nm to 1610nm (See ordering information)
DWDM C-Band/L-Band (ITU-T G.694.1 compliant)
Output Power
1310nm FP -7dBm ± 1dBm
1550nm & CWDM 0dBm ± 1dBm
DWDM +7dBm ± 1dBm

电气
电压 +12V DC
功率 6 瓦 (9 瓦 DWDM)

物理参数
Number of slots 1

标准
Laser Safety Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
EMI/RFI Complies with FCC regulations for class A devices
Complies with EU EMC directive

订购信息|

Optical to Optical Wavelength Shifter/Regenerator
7707OO13‑2‑OC 1310nm FP laser and standard receiver (line side), VistaLINK®
7707OO15‑2‑OC 1510nm DFB laser and standard receiver (line side), VistaLINK®
7707OO15‑2L‑OC 1510nm DFB laser, dual line, VistaLINK®
CWDM (Ordering Information)
7707OOxx‑2‑OC CWDM DFB laser and standard receiver (line side), VistaLINK®
7707OOxx/yy‑2L‑OC CWDM DFB laser, dual line, standard receiver, VistaLINK®
7707OOxx‑2‑OC‑H CWDM DFB laser and high sensitivity receiver (line side), VistaLINK®
7707OOxx/yy‑2L‑OC‑H CWDM DFB laser, dual line, high sensitivity receiver, VistaLINK®
DWDM (Ordering Information)
7707OODxxx‑2‑OC DWDM DFB laser and standard receiver (line side), VistaLINK® (Contact Factory for Wavelength Availability)
7707OODxxx/Dyyy‑2L‑OC DWDM DFB laser, dual line, standard receiver, VistaLINK® (Contact Factory for Wavelength Availability)
7707OODxxx‑2‑OC‑H DWDM DFB laser and high sensitivity receiver (line side), VistaLINK® (Contact Factory for Wavelength Availability)
7707OODxxx/Dyyy‑2L‑OC‑H DWDM DFB laser, dual line, high sensitivity receiver, VistaLINK® (Contact Factory for Wavelength Availability)

订购可选项
注意 • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SC SC/PC
+AP+SC SC/APC (Angle Polished)
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes

Enclosures
350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure