Interact with this product in a Layout Tool:

The 7707OO-2L-3G is a VistaLINK® -capable, optical to optical wavelength shifter/regenerator for Video & Evertz proprietary signals. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®.

The 7707OO-2L-3G accepts 2 fiber inputs and provides 2 optical outputs respectively. All versions accept 1270nm to 1610nm optical input signals on multi-mode or single-mode fiber. The 7707OO-2L-3G is available in 1310nm, CWDM and DWDM configurations.


  • See below chart for Reclocking Rates
  • Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
  • Wide range optical input (1270nm -1610nm)
  • 1310nm and CWDM wavelengths available for optical outputs
  • DWDM wavelengths (ITU-T G.694.1 compliant) also available for optical outputs
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
  • Detection and display of optical input power and data rate
  • Fully hot-swappable from front of frame
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller

Optical Input Standards (reclocked)

Video RatesEvertz Rates
StandardData RateStandardData Rate
SMPTE ST 259-L270Mb/s7707VT82.5Gb/s
SMPTE ST 292-11.5Gb/sG-LINK2.5Gb/s
DVB ASI270Mb/s7707VT2-HD3.125Gb/s
SMPTE ST 305270Mb/s7707VT4-HS3.125Gb/s
SMPTE ST 4242.970Gb/s  


Optical Inputs

输入数量 2
Rates (non-reclocked) 125Mb/s-3.187Gb/s
端口数目 Female SC/PC, FC/PC, SC/APC
工作波长 1270nm -1610nm
Standard & Equipment Side -22dBm
High Sensitivity (-H) -29dBm
Max. Input Power
Standard & Equipment Side -1dBm
High Sensitivity (-H) -7dBm
光纤大小 62µm core / 125µm overall

Optical Outputs

标准 Same as optical input
输出数量 2
端口数目 SC/PC, FC/PC, SC/APC female housing
反射损失 < 14dB
光纤大小 9µm core / 125µm overall
Line X/Line Y
标准 1310nm (nominal)
CWDM 1270nm to 1610nm (See ordering information)
DWDM C-Band/L-Band (ITU-T G.694.1 compliant)
Output Power
1310nm FP -6dBm ±1dBm
CWDM 0dBm ±1dBm
DWDM +7dBm ±1dBm


电压 +12VDC
功率 6 瓦 (9 瓦 DWDM)


Number of slots 1


Laser Safety Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
EMI/RFI Complies with FCC regulations for class A devices
Complies with EU EMC directive


Dual Optical to Optical Wavelength Shifter/Regenerator
7707OO13‑2L‑3G 1310nm FP laser standard receiver, VistaLINK®
CWDM (Ordering Information)
7707OOxx/yy‑2L‑3G CWDM DFB laser, standard receiver, VistaLINK®
7707OOxx/yy‑2L‑3G‑H CWDM DFB laser, high sensitivity receiver, VistaLINK®
DWDM (Ordering Information)
7707OODxxx/Dyyy‑2L‑3G DWDM laser, standard receiver, VistaLINK® (Contact Factory for Wavelength Availability)
7707OODxxx/Dyyy‑2L‑3G‑H DWDM laser, high sensitivity receiver, VistaLINK® (Contact Factory for Wavelength Availability)


注意 Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+AP+SC SC/APC (Angle Polished)
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes


350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure