Skip to Main Content

7708VB-4-HSE

Dual HD or Quad SD/ASI Transceiver with Ethernet

Interact with this product in a Layout Tool:

The 7708VB-4-HSE is part of the Evertz FacilityLINK™ series of Multiservice fiber transport products. Common applications include bi-directional transport of video plus Ethernet for purposes as simple as bringing back M&C data to full file-transfer or LAN extension. The 7708VB-4-HSE combines video and data into a single product which utilizes a 2.97GB/s link rate.

特点

  • Bi-directional transport of two HD-SDI, four SD/ASI or one HD-SDI plus three SD/ASI signals plus Ethernet on a single card
  • Ethernet transport connection may be RJ45 or optical when fitted with optional SFP optical modules (see ordering options)
  • FBM (Flexible Bandwidth Management) controls Ethernet port data rate with respect to presence or absence of applied input video. 2.97GB/s transport link, min 30MB/s Ethernet available with two input HD-SDI applied
  • Signal transport uninterrupted by the application/loss of input signals
  • Automatic coaxial input equalization up to 100m at 1.485GB/s and 250m at 270MB/s (Belden 1694)
  • Fully hot-swappable from front of frame
  • Optical output wavelengths of 1310nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
  • Occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity.

指标|

串行视频输入
输入数量 4
Max Capacity Two HD-SDI, one HD-SDI plus three ASI/SD signals or up to 4SDI and/or ASI signals
标准
Input 1-2 ST 292-1, SMPTE ST 259-C, DVB-ASI
Inputs 3-4 SMPTE ST 259-C, DVB-ASI
端口数目 BNC per IEC 61169-8 Annex A
均衡 Automatic to 100m @ 1.485GB/s and 250m @ 270MB/s with Belden 1694 or equivalent cable
反射损失 > 15dB up to 1.5GB/s
串行视频输出
输出数量 4
标准
Output 1-2 ST 292-1, SMPTE ST 259-C, DVB-ASI
Outputs 3-4 SMPTE ST 259-C, DVB-ASI
端口数目 BNC per IEC 61169-8 Annex A
信号电平 800mV nominal
直流偏置 0V ±0.5V
上升/下降时间
1.485GB/s < 270ps
270MB/s 900ps nominal
过冲 < 10% of amplitude
反射损失 > 12dB up to 1.5GB/s
频带抖动 < 0.2UI
Optical Link Output
输出数量 1 per SFP
端口数目 Female LC/UPC
工作波长
标准 1310nm
CWDM 1270nm -1610nm
Output Power
1310nm -2dBm ±1dBm
CWDM +3dBm +1dBm
Optical Link Input
输入数量 1 per SFP
端口数目 Female LC/UPC
Operating Wavelength 1270nm-1610nm
Max Input Power -1dBm
光敏感度
标准 -19dBm
Ethernet Input/Output
标准 IEEE 802.3 (10 Base T), IEEE 802.3u (100 Base TX), IEEE 802.3ab (1000 base TX)
Optical
When fitted with optional SFP
端口数目 SFP (duplex female LC/UPC)
Output
工作波长
标准 1310nm
CWDM 1270nm -1610nm
Output Power
1310nm -2dBm ±1dBm
CWDM +4dBm ±1.5dBm
Input
Operating Wavelength 1270nm-1610nm
Max Input Power -1dBm
光敏感度
标准 -21dBm
High Sensitivity -28dBm
Ethernet
端口数目 RJ45
Cable Requirements
10 BaseT UTP category 3, 4 or 5 cable up to 328ft/100m (2 pairs)
100 BaseTX UTP category 5 cable up to 328ft/100m (2 pairs)
1000 BaseTX UTP category 5 cable up to 164ft/50m (4 pairs)
电气
电压 +12V DC
功率 13 watts
物理参数
插槽数 2

订购信息|

7708VB-4-HSE Dual HD or Quad SD/ASI Transceiver with Ethernet, SFP's not included
订购可选项
注意 Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+3RU 3RU rear plate for use with 350FR, 7800FR or 7801FR Multiframes
Enclosures
350FR Portable Multiframe which holds 7 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7801FR 1RU Multiframe which holds up to 4 single slot or 2 dual slot modules
SFP for Ethernet or Optical Link
SFPTR-13 SFP Transceiver, 1310nm, standard sensitivity receiver, supports rates up to 3GB/s
SFPTR-Cxx SFP Transceiver, CWDM, standard sensitivity receiver, supports rates up to 3GB/s
SFPTR-CxxH SFP Transceiver, CWDM, high sensitivity receiver, supports rates up to 3GB/s