Interact with this product in a Layout Tool:
Evertz' 7882IRDA-S2X series is a professional Integrated Receiver Decoder (IRD) platform for receiving, demodulating and decoding digital DVB-S/S2/S2X satellite signals. Applications include signal reception for broadcasters, cable, DTH/IPTV providers and any other small to large head-end operators who need to receive and utilize or re-distribute satellite content.
Leveraging inputs from low-cost public Internet sources, the 7882IRDA-S2X is able to receive feeds from terrestrial distribution networks, broadcast quality video networks or the cloud utilizing RIST and SRT technologies.
The 7882IRDA-S2X series utilizes an advanced decoder with support for MPEG-2, H.264/AVC and HEVC for SD, HD and 3G encoded signals up to 4:2:2 10-bit and HDR. SMPTE ST 2110 10GbE output is available for video, audio and ANC data transport across unique configurable multicast addresses.Flexible RF, ASI and IP inputs provides a future-proof solution also ideal for turnaround, transcoding, monitoring and other applications for signals delivered over satellite, fiber and other network media.
Designed with a modular hot-swappable form-factor, paired with Evertz' award-winning 7800 and 570 series enclosures, the 7882IRDA-S2X provides a neat and clean solution with all cabling at the rear of the frame. Dual redundant power supplies and fans are also hot-swappable from the front of the frame for quick replacement without compromising the integrity of critical signal paths.
An innovative removable front control panel is also available when paired with the 1RU chassis for a traditional IRD solution, while maintaining all of the benefits of modularity. Alternatively, an external control panel is also available for remote control of multiple units.
The 7882IRDA-S2X series also provides extensive monitoring of critical parameters such as RF power, lock status, EsNo ratio/margin, L-Band frequency, MER, BER, packet errors, constellations diagrams and more; this presents a convenient solution for broadcasters and cable companies who wish to not only receive, but also remotely monitor signal quality. These parameters, as well as full monitoring and control of the module are available through the web-browser and relayed over SNMP for use with third-party or Evertz' own VistaLINK® PRO network management system (NMS).
特点|
- Automatic changeover between various RF, ASI or IP inputs
- One conditional access module (CAM) slot for customer supplied DVB-CI compliant modules
- Support for advanced transport stream processing, including straight pass through or service PID filtering/remapping of compressed stream outputs with bitrate control
- Automatic detection of modulation type, filter roll-off, symbol rate, pilot presence (on/ off) and frame length, resulting in effortless configuration
- Future-proof solution with software upgradable support of: DVB-S2x, RIST/SRT Internet input, SMPTE ST 2110 output, HEVC, 10-bit 4:2:2 and HDR decoding, and audio decoding of Dolby® E, Dolby® Plus, AAC-LC, AACHE 5.1specifications
指标|
Modulation Support | |
---|---|
Symbol Rate | |
QPSK, 8PSK, 16APSK | Up to 64 Msps |
32APSK | Up to 51 Msps |
64APSK | Up to 43 Msps |
Coding Rates | |
---|---|
FECFRAME Normal (64,800 bits) | |
DVB-S | |
QPSK | 1/2, 2/3, 3/4, 5/6, 7/8 |
DVB-S2 | |
QPSK | 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 |
8PSK | 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 |
16APSK | 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 |
32APSK | 3/4, 4/5, 5/6, 8/9, 9/10 |
DVB-S2X | |
QPSK | 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10, 13/45, 9/20, 11/20 |
8PSK | 3/5, 2/3, 3/4, 5/6, 8/9, 9/10, 23/36, 25/36, 13/18 |
8APSK-L | 5/9, 26/45 |
16APSK | 2/3, 3/4, 4/5, 5/6, 8/9, 9/10, 26/45, 3/5, 28/45, 23/36 |
16APSK-L | 5/9, 8/15, 1/2, 3/5, 2/3 |
32APSK | 3/4, 4/5, 5/6, 8/9, 9/10, 32/45, 11/15, 7/9 |
32APSK-L | 2/3 |
64APSK | 11/15, 7/9, 4/5, 5/6 |
64APSK-L | 32/45 |
FECFRAME Short (16,200 bits) | |
---|---|
DVB-S2X | |
QPSK | 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10, 11/45, 4/15, 14/45, 7/15, 8/15, 32/45 |
8PSK | 3/5, 2/3, 3/4, 5/6, 8/9, 7/15, 8/15, 26/45, 32/45 |
16APSK | 2/3, 3/4, 4/5, 5/6, 8/9, 7/15, 8/15, 26/45, 3/5, 32/45 |
32APSK-L | 2/3, 32/45 |
RF Input | |
---|---|
Number of Ports | 4 |
Connectors | 75Ω F-Type (BNC optional) |
Frequency Range | 950 – 2150MHz |
RF Input Range | -20 – 65dBm |
LNB Voltage | 13/18V DC, off (selectable) |
Maximum LNB Current | 400mA |
Protection | Short circuit, overload |
Local Oscillator Control | 22kHz on/off (selectable); 1000 – 35000MHz to be used for C-Band and Ku-Band |
Input Return Loss | 15dB min. |
Noise Figure | 9dB max. |
AFC Tuning Range | ±67MHz using search range |
IF Filter Bandwidth | Adjusted from 6 – 50MHz in 1MHz steps |
SCPC/MCPC Support | Yes |
CCM, VCM and ACM Support | Yes |
ASI Input/Output | |
---|---|
Number of Ports | 1x input, 1x output |
标准 | DVB TR101-891 |
端口数目 | 75Ω BNC |
MPEG over IP Input/Outputoptional | |
---|---|
Number of Ports | |
7882IRDA-S2X | 1 |
7882IRDA-S2X-10GE2 | 2 |
标准 | SMPTE ST 2022-1, -2 |
端口数目 | 1/10GbE data port using SFP (SFP ordered separately) |
SMPTE ST 2110 Outputoptional | |
---|---|
Quantity | |
7882IRDA-S2X | 1 |
7882IRDA-S2X-10GE2 | 2 |
标准 | SMPTE ST 2110-20, 2110-30, 2110-40 |
端口数目 | 10GbE data port using SFP (SFP ordered separately) |
RIST Profile Supportoptional |
---|
- RIST simple profile
- RIST main profile, baseline (tunneling support)
- RIST main profile, DTLS (certificate- based encryption/authentication)
- RIST main profile, PSK (shared key- based encryption/authentication)
Conditional Access Module (CAM) Support |
---|
- One slot for customer supplied DVB-CI compliant card
- Variable clock rate support to interface with various CAM types
- Auto select feature to automatically descramble the active channel
Baseband Video Outputs | |
---|---|
Number of Ports | 3 |
端口数目 | 75Ω BNC |
标准 | SDI (SMPTE ST 259), HD-SDI (SMPTE ST 292-1), 270MB/s ST 272-1994 (10-bit), 3GB/s (SMPTE ST 424M/424M-A)* |
*Note: the third BNC is configurable to be ASI or SDI output
AES Audio Outputs | |
---|---|
Number | 8x PIDs (16x channels of embedded PCM) |
端口数目 | BNC breakout from DB-15 |
Type | 非平衡 AES |
标准 | AES3 (aka AES/EBU) as an AES output standard |
Compression Format | MP1L2 and Dolby® Digital AC-3 upto 3/2L |
Passthrough | PCM, Dolby® Digital, Dolby® E |
Decode (optional) | Dolby® E, Dolby® Plus, AAC-LC, AACHE 5.1 |
Ancillary Data | |
---|---|
Embedding Of | Audio passthrough, closed caption/Teletext, SCTE35 to 104 (optional), AFD/WSS, timecode |
Low Speed Data | |
---|---|
Number of Ports | 1 |
端口数目 | RJ-45, 10/100/1000 |
Type | De-encapsulation from control data PID |
Frame Sync |
---|
- Sync 1080i/59.94, 1080i/50, 1080p/59.94 level A and 1080p/50 level A, 720p/59.94, 720p/50, 525i/59.94, 625i/50
- Video Delay between 3x lines and 1x frame +3x lines
- Programmable output phase with respect to reference input
- Reference input via common 7800FR/7801FR/570FR frame reference connector
Control |
---|
- SNMP over Ethernet via frame controller
- Web browser
- Low speed control data over Ethernet output derived from data PID
- 4x GPO following commercial trigger
- Ability to store ten preset configurations
- Event log support with exporting capabilities supported on VLPRO and built-in control port for direct control and management
- Syslogs import and export configuration available to download locally and export to a remote server
电气 | |
---|---|
功率 | < 80 watts |
电压 | 12V DC |
工作温度 | 0-50°C |
物理参数 | |
---|---|
插槽数 | |
7801FR-HP | 2 |
570FR-HF | 2 |
7800FR | 3 |
订购信息|
7882IRDA-S2X | Single-channel satellite IRD with quad L-Band input, conditional access slot, ASI input and output, MPEG2/H.264/Optional HEVC, SD/HD/3G decode (4:2:0 8bit). Optional software license to support S2x features. |
---|---|
7882IRDA-S2X-10GE2 | Single-channel satellite IRD with quad L-Band input, conditional access slot, ASI input and output, dual 1G/10G SFP cages, MPEG2/H.264/Optional HEVC, SD/HD/3G decode (4:2:0 8bit). Optional software license to support S2x features. |
订购可选项 | |
---|---|
+B75 | 75Ω BNC connector option for the rear panel |
+IP | Optional MPEG over IP output |
+IP10G | Uncompressed Video, Audio, Ancillary Data using SMPTE ST 2110 (SFP sold separately) |
+FSE | Frame Sync option. Provides genlock with external reference. Single channel. |
+HEVC | HEVC 4:2:0 8Bit support for 7881IRDA |
+10B422 | 10-Bit 4:2:2 Decoding Option |
IRD-FK-10B422-HEVC | License to enable 10-Bit 4:2:2 HEVC decode for 7882IRDA-S2X |
IRD-FK-AAC | License to enable advanced audio coding |
IRD-FK-AACHE | License to enable AAC HE, v1 and v2 Audio Decoding up to 5.1 |
+DD | Optional Dolby® E/AC3 Decoder |
IRD-FK-SCTE104 | License to enable SCTE104 on SD/HD/3G-SDI outputs. SCTE35 triggers on ASI inputs are transferred into SCTE104 message on VANC of SD/HD/3G-SDI outputs. |
+DBISS | Decryption of BISS and BISSE for multiple products. Support BISS and BISSE for 2 incoming streams. |
7882DM-FK-S2X | License to enable DVB-S2X (broadcast and DSNG profiles) demodulation standards. License is enabled per demod channel. |
evEDGE-HDR-3G | License for a single path of 3DLUT HDR conversion on various evEdge hardware platforms. Up to 1080p signals supported. Check with each HW platform to determine maximum number of supported licenses. |
evEDGE-RIST-MP | Single TX or RX RIST (Reliable Internet Stream Transport) Main Profile License (See specific APP for quantity availability per device) |
+AVM | AVM essential option for decoder (7881DEC2-MP2) |
+HDC | High Quality Downconverter Option |
Ordering Options Only Available On The 7882IRDA-S2X-10GE2* | |
---|---|
+10GE2 | Software license to enable second port on 7882IRDA series for uncompressed Video, Audio, Ancillary Data using SMPTE ST 2110 (SFP sold separately) |
+IP2 | Software license to enable second IP port on 7882IRDA series for MPEG over IP Input/output (SFP sold separately) |
Rear Plate Suffix | |
---|---|
+3RU | 3RU rear plate for use with 7801FR-HP or 570FR-HF Multiframes |
Enclosures | |
---|---|
7801FR-HP | 1RU Multiframe with a single high power AC power supply. Holds up to 4 single slot or 2 dual slot modules |
570FR-HF | 3RU Multiframe which holds 15 single slot modules with high flow AC power supply |
7801FR Options & Accessories | |
---|---|
注意 | • when housed inside of the 7800FR, the 7882IRDA-S2X series require 3x slots of power per module |
7801PS-HP | Additional High Power AC Supply for 7801FR frame |
---|---|
7801FC | Frame controller for 7801FR |
7801FC-IRD | Frame controller for 7801FR-CP, for use with 7881IRD modules |
570FR-HF Options & Accessories | |
---|---|
注意 | • two 570FR-FBP are required per 7882IRDA module |
570FR-HF | 3RU Multiframe which holds up to 15 single slot modules with high flow AC power supply |
---|---|
570PS-HF | High Flow Power Supply for the 570FR |
570FC | VistaLINK® PRO Frame controller module for 570FR |
570FR-FBP | Front blank plate for 570FR, single slot width, for installation over 77xx/78xx series modules installed in 570FR. Use multiple plates for multi-slot cards. |
SFP Interface Options | |
---|---|
SFPTR-RJ45-SGM-AV | 10/100/1000Mbps RJ45 SFP module with SGMII interface |
SFP1G-TR13 | SFP Optical Transceiver, 1.25Gbps, 1310nm, SMF, 20km |
SFP1G-TR15S | SFP Optical Transceiver, 1.25Gbps, 1550nm, SMF, 40km |
SFP1G-TR15H | SFP Optical Transceiver, 1.25Gbps, 1550nm, SMF, 80km |
SFP10G-TR13-J | SFP+ Optical Transceiver, 10Gbps, 1310nm, SMF, 10km |
SFP10G-TR15S | SFP+ Optical Transceiver, 10Gbps, 1550nm DFB, SMF, 40km Max. |
Front Control Panel | |
---|---|
注意 | • front control panel is only compatible with the 7801FR frame and requires the 7801FC-IRD |
+IRDCP | Front control panel for 7801FR for use on 788xIRD modules |
---|
Remote Control Panel |
---|
CP-9000 | Remote control panel, 1RU, for supported 77xx/78xx series products |
---|