Skip to Main Content

EMR-64x64-3G

64x64 SD/HD/3G/6G/12G Modular Router

Interact with this product in a Layout Tool:

The EMR-64x64-3G is a 64-input by 64-output modular router designed to natively switch 12G, 6G, 3G, HD, and SD signals. It supports UHD signals as quad-link using deterministic routing. Single-link 12G and 6G support can also be added as a feature key. A variety of different rear plates are available that provide connections via HDBNC, fiber or a combination of both.

For maximum control flexibility, this router can be used in conjunction with Evertz award-winning MAGNUM Unified Control System. Or, for smaller systems, the router can host a number of Evertz control panel models over Ethernet.

Control • The EMR-64x64-3G is housed in any of the standard Evertz EMX6 or EMX3 frames supporting dual frame controllers, providing redundant control connections.

Remote Control Panel • Any traditional or simple Evertz control panels can be used with the EMR-64x64-3G while hosted either locally or through the control system.

External Third-Party Control • The EMR-64x64-3G can be controlled remotely via external third-party control devices, such as an automated system.

Power Supply • The EMR-64x64-3G is housed in standard Evertz EMX6 or EMX3 frames, both of which support dual hot-swappable power supplies ensuring continuous operation.

Technical • The EMR-64x64-3G as a base card offers a full 3GB/s bandwidth. UHD&4K support can also be enabled with a feature key. Automatic bit rate detection on the input equalizer allows any mix of 12G, 6g 3G, HD and SD signals in the same unit. Clean and quiet switching is also available on any six outputs with a feature key.

Features

  • Designed with up to 12GB/s input EQs and output reclockers
  • Full broadcast specifications
  • Router control using Quartz native and 3rd party protocols
  • Redundant Ethernet network connections
  • Redundant Power
  • Full VistaLINK® PRO command and control, SNMP
  • Output up to 12G - reclocking on/off
  • Rear plate support for HDBNC, fiber or both
  • Router supports routing of many different signal rates, 10 and 12bit signals

Exceptional Signal support

Full signal support for following signals on all ports:

  • 12G [3840x2160] & [4096x2160] at 25p, 29.97p, 50p, 59.94p
  • 6G [3840x2160] & [4096x2160] at 25p, 29.97p
  • 3GA [1920x1080] & [2048x1080] at 25p, 29.97p, 50p, 59.94p
  • 3GB [1920x1080] & [2048x1080] at 25p, 29.97p, 50p, 59.94p
  • HD [2048x1080] at 25p, 29.97p
  • HD [1920x1080] & [1280x720] at 25p, 29.97p, 50i, 59.94i
  • 270M (50 and 59.94 and ASI)

Specifications

Serial Video Inputs

标准 12G, 6G, 3G, 1.5G, SD, and ASI

Serial Video Outputs

标准 Same as input

Switching Reference

Reference Inputs 2x BNC, Analog 625/525
信号电平 1V p-p ±3dB
阻抗 75Ω

Control

Ethernet 2x RJ-45
Protocol Quartz, SNMP, Probel SW-P-02 & -08 and GVG SMS7000
Serial Signal RS-232/RS-422

电气

EMX6-FR
AC Mains Input Auto-ranging, 100⇔240V AC, 50/60Hz
Max Operating Current 9.5A (@ 115V AC nominal)
4.0A (@ 220V AC nominal)
Max Power Consumption 650 watts (40 watts per slot)
Power Supply Configuration 1 supply standard, optional redundant supply requires separate inlet
端口数目 IEC 60320-1 per power supply
Fuses 6.3A, 250V ceramic time delay
5 x 20 mm -2 per power supply
EMX3-FR
AC Mains Input Auto-ranging, 100⇔240V AC, 50/60Hz
Max Operating Current 4.6A (@ 100V / 60Hz)
1.85A (@ 240V / 50Hz)
Max Power Consumption 450 watts (90 watts per slot)
Power Supply Configuration 1 supply standard, optional redundant supply requires separate inlet
端口数目 IEC 60320-1 per power supply
Fuses 6.3A, 250V ceramic time delay
5 x 20 mm -2 per power supply

物理参数

尺寸
EMX6-FR 19"W x 10.5"H x 15.75"D
(483mm W x 266mm H x 400mm D)
EMX3-FR 19"W x 5.25"H x 15.75"D
(483mm W x 133mm H x 400mm D)
工作温度 0-40°C
Module Capacity
EMX6-FR 15 single-slot modules
EMX3-FR 5 single-slot modules
双通道
EMX6-FR Full: 64lbs (29kg)
Empty: 34.8lbs (16kg)
EMX3-FR Full: 32lbs (14.5kg)
Empty: 17.4lbs (8kg)

Ordering Information

EMR-64x64-3G 64x64 SD/HD/3G/6G/12G Modular Router

订购可选项

EMX Frames
EMX6-FR EMX 6RU Router Chassis with 15 slots
EMX3-FR EMX 3RU Router Chassis with 5 slots
EMX-FC EMX frame controller
EMX Rear Plates
EMR-RP4-64C Rear plate with 64x64 HDBNC
EMR-RP4-64F Rear plate with 64x SFP Transceiver ports
EMR-RP4-32C-32F Rear plate with 32x HDBNC plus 32x SFP Transceiver ports
EMX Power Supplies
+6PS Redundant Power Supply for EMX6-FR
+3PS Redundant Power Supply for EMX3-FR
EMX Optional Features
EMR-FK-12G Support for 64x64 single-link 12G UHD signals
EMR-FK-CS6 Enable up to 6x paths of clean switch and Evertz patented SoftSwitch technology for the EMR-32x32-3G and EMR-64x64-3G routers

SFP Options

注意 Contact the factory for additional SPF options
SFP3TR-HDBNC-12G 12G/3G/HD/SD Reclocking, MSA SFP Transceiver, HD-BNC Connectors..
SFP3TR-13-12G SD/HD/3G/12G Reclocking SFP Transceiver using a wavelength 1310nm, Optical power: -5~0.5dBm, Sensitivity: -10dBm, handles pathological pattern, 2LC connectors. For use in Evertz 12G Router and Processing Products.
SFPTR-DIN-3G SFP Coaxial Transceiver for Signals up to 3 Gig, Mini DIN Connectors
SFPTR-CXX-H SFP Transceiver, CWDM wavelengths, high sensitivity receiver, supports rates to 3GB/s
SFPTR-13 SFP Transceiver, 1310nm, standard sensitivity receiver, supports rates to 3GB/s
SFPTR-M-DIN SFP coaxial transceiver for signals up to 3 Gig, MSA pinout, mini DIN connectors