NEXX-IO-C1

Here and now, the NEXX-IO-C1, the essence of any NEXX frame, brings SDI routing to the NEXXT level. With unparalleled SDI processing to distribute signals like never before.

Every signal on the input gets de-embedded at no added cost. Subsequently, every signal going out of the outputs gets embedded. With two SFP cages to transport MADI, optically or electrically. One of the SFPs can be configured to be Evertz' TDM, supporting 512x512 audio channels. All audio in the NEXX-IO-C1 gets sent to the Audio Crosspoint and the Video/ANC to the Video Crosspoint. Audio simplicity at the core of your workflow.

Timing of signals incoming to the router is no longer a headache with available frame syncs on every 3G port or on 16 of the 32 ports in UHD. Not to mention a free Buffer to make clean switching signals more effortless than ever.

Non-blocking Multiviewer Inputs is Evertz specialty, and the NEXX-IO-C1 is no exception. The NEXX-IO-C1 has four Standard Edition Multiviewers, 16x1, built onto this IO card, each MV output unlocked with a license. Directly connected to the crosspoint in the NEXX, all inputs in the NEXX are available as Multiviewer sources, the MV output available to any port, even 2110 outputs, on the router. No need to re-enter the MV output to route to multiple destinations. Our most cost effective Multiviewer we have ever made.

Features

• Modular card for the NEXX One slot card
• 32 HDBNC Inputs x 32 HDBNC Outputs
• Support for SD/HD/3G/6G/12G data rates
• 270MB ASI Support for routing
• Support for mixed concurrent data rates on a per port basis
• 2x2 MADI or (1x1 MADI and 1x1 TDM) input MADI SRC for unlocked signals
• Audio Embedding and De-embedding on every port
• 3G Frame Sync on all 32 inputs OR UHD/12G Frame Sync on 16 inputs
• Gear boxing: quad 1080p to single essence 12G & single essence 12G to quad 1080p
• 4x Standard Edition MVs (16x1)

SDI Module

• 32x32 HDBNC Ports
• Gear boxing: quad 1080p to single essence 12G & single essence 12G to quad 1080p
• 1SFP for TDM or MADI
• 1SFP for MADI
• Support SM, MM, DIN, or HDBNC SFPs
• Input Frame Sync
• Frame Sync on all 3G Inputs
• Frame Sync on 16 UHD Inputs
• Four Standard Edition Multiviewers

Standard Edition Multiviewers

• Individually licensed Multiviewers
• Four 16x1 Multiviewers on each Module
• Mixed concurrent inputs including SD, HD, 3G, and 12G
• 1080p or 1080i (50 or 59.94) outputs
• Static and Dynamic UMDs with Image Video and TSL 5
• 时间码 (NTP and D-VITC)
• Up to 16 Visual Audio Bars
• Ability to place the UMD and Audio bars inside or outside active video with four modes of reduction
• 43 Fixed Layouts

Need a more feature-rich Multiviewer output on some or all of your monitors? Mix and match standard and advanced Multiviewers with our X30 module, the NEXX-670.

Fully Populated NEXX 5RU with 12x SDI Module Capabilities

• 384x384 Embedded 12G Inputs
• 384x 3G frame sync or 192x 12G frame sync*
• 12x12 TDM & 12x12 MADI
• Or 24x24 MADI
• 48 Lightweight Multiviewers

*-3G and 12G frame sync can be configured per group of 8 inputs and mixed on the same module

Need more Inputs, Outputs, or Slots, combine multiple frames together through FX-LINK.

Specifications

• Image Video
• TSL 5.0

• Supplied by NEXX-XC within the NEXX-5RU or NEXX-3RU frames

Ordering Information